- Top panel<\/strong><\/a><\/li>
- Rear panel<\/strong><\/a><\/li><\/ul><\/li>
- Loudbox Bluetooth Connectivity<\/a><\/strong><\/li><\/ol>\n\n\n\n
Loudbox Setup and Connections<\/strong><\/h2>\n\n\n\n
IMPORTANT: <\/strong>Some of the features below are not available on the Loudbox Mini. Refer to the Loudbox Mini User Guide<\/strong><\/a> for more information.<\/p>\n\n\n\n
Fishman Loudbox amps are similar to others, but they also have some features that set them apart from the rest. Most settings are straightforward, but let\u2019s go over some unique features, so you have more time playing and less time setting up.<\/p>\n\n\n\n
Top Panel<\/strong><\/h3>\n\n\n\n
![\"Loudbox](\"https:\/\/www.sweetwater.com\/sweetcare\/media\/2022\/10\/Loudbox-top-panel-1024x216.png\")
<\/figure>\n\n\n\nPad<\/strong><\/h4>\n\n\n\n
Some guitars have high-output pickups<\/a>, which send a hotter signal to a guitar amp than others. So, if your guitar has high-output pickups or the Clip LED illuminates even at low-input gain levels, push the Pad <\/strong>button, which will cut the signal by 10dB. This should help with any clipping issues.<\/p>\n\n\n\n
Phantom power<\/strong><\/h4>\n\n\n\n
IMPORTANT<\/strong>: Phantom power may cause damage to some unbalanced mics, preamps, or stompboxes that you have modified for balanced XLR use. Please refer to the manufacturer\u2019s manual before connecting your device.<\/p>\n\n\n\n
- Please note that standard Phantom Power is 48v, but in the case of Fishman Loudbox amps, they provide high current 24v. Check out Fishman\u2019s FAQ<\/a> and User Guide<\/a> for more information.<\/li><\/ul>\n\n\n\n
Besides the Loudbox Mini, Fishman Loudbox amps offer you high-current 24v of Phantom Power<\/a>, so you can connect some preamps and many condenser and dynamic microphones to one of the inputs. This gives you complete control of the mic and eliminates the need to use additional channels on a mixer. Remember to connect your mic before <\/em>turning on Phantom Power! If it is turned on before connecting your mic, it can result in a loud pop and may damage your mic or speaker.<\/p>\n\n\n\n
<\/div>Anti-Feedback<\/strong><\/h4>\n\n\n\n
There may be a time when you experience feedback, particularly with lower frequencies. On acoustic guitars, this often occurs between the first and fourth frets on the low-E (sixth) string. The Anti-Feedback <\/strong>knob acts like a notch filter<\/a>, which will cut frequencies at around 100Hz. If you have feedback issues, Fishman recommends setting the knob to the seven-o\u2019clock position then adjusting as necessary.<\/p>\n\n\n\n
Phase<\/strong><\/h4>\n\n\n\n
Similar to Anti-Feedback<\/strong>, the Phase <\/strong>feature addresses feedback issues. However, instead of low-end frequencies (low-E string between frets one and four), it handles higher frequencies (low-E string from frets five and above). So, if you adjust Anti-Feedback, consider pressing the Phase button as well to get a more balanced tone.<\/p>\n\n\n\n
![\"Fishman](\"https:\/\/www.sweetwater.com\/sweetcare\/media\/2022\/10\/Fishman-Anti-feedback-and-diagram.png\")
<\/a><\/figure><\/div>\n\n\n\nAnti Feedback and Phase controls. Click the image to learn more.<\/em><\/p>\n\n\n\n
Channel Mute<\/strong><\/h4>\n\n\n\n
Another unique feature of the Fishman Loudbox amps is Channel Mute. Turning Channel Mute<\/strong> on will mute the input signal from inputs 1 and <\/em>2 to the speaker and any XLR outputs. However, any signal from Bluetooth or the Aux <\/em>input will still pass through. This is especially useful in smaller venues that don\u2019t have a PA system and you want background music playing through the amp while you\u2019re off taking a break from your set.<\/p>\n\n\n\n
Rear panel<\/strong><\/h3>\n\n\n\n
![\"Loudbox](\"https:\/\/www.sweetwater.com\/sweetcare\/media\/2022\/10\/Loudbox-rear-panel-1024x122.png\")
<\/figure>\n\n\n\nNow that you have learned about the features of the front panel, let\u2019s cover the rear of the amp. Since the connections are straightforward, here are some tips for connecting your amp.<\/p>\n\n\n\n
- The Fishman Dual Foot Switch<\/a> is the only compatible footswitch for the Loudbox.<\/li>
- Use the Mix D.I. Out if you want to send both channels to a mixer or a secondary amp. This includes any EQ and Effects settings on the Loudbox.
- The Mix D.I. Out is ground isolated, which helps prevent ground loop hum.<\/li><\/ul><\/li>
- Use the Channel D.I. Outs if you want to send pre-EQ signals to a mixer or a secondary amp.<\/li>
- If you utilize external effects, use the Effects Loop (serial) if possible. Check out our guide about Effects Loops<\/a> to learn more!<\/li><\/ul>\n\n\n\n
- Use the Mix D.I. Out if you want to send both channels to a mixer or a secondary amp. This includes any EQ and Effects settings on the Loudbox.
- The Fishman Dual Foot Switch<\/a> is the only compatible footswitch for the Loudbox.<\/li>
- Rear panel<\/strong><\/a><\/li><\/ul><\/li>