- Register the serial number<\/a><\/strong><\/li>
- SPD-SX setup and configuration<\/a><\/strong>
- Hardware<\/a><\/strong><\/li>
- Computer<\/a><\/strong><\/li><\/ul><\/li>
- How to build a kit on the SPD-SX<\/strong><\/a>
- Change a pad sample<\/a><\/strong><\/li>
- Name the kit<\/a><\/strong><\/li>
- Adjust pad sensitivity and response<\/a><\/strong><\/li><\/ul><\/li><\/ol>\n\n\n\n
<\/div>\n\n\n\nRegister the serial number<\/h2>\n\n\n\n
Before we dive into setting up your SPD-SX, the first thing to do is register the product with Roland. By registering the SPD-SX, you\u2019ll gain access to Roland\u2019s product support, an extended warranty, training videos, and clinic information. Follow the steps below to register and then continue to setup and configuration<\/a>.<\/p>\n\n\n\n
\n<\/div>\n\n\n\n- Log in to your Roland Backstage account<\/a>. If you don\u2019t have one yet, you can create one here<\/a>. <\/li>
- Roland will then send an account activation email to the registered email address to complete the account creation process.<\/li>
- On your account home page, click My Gear<\/strong> and select Register a Product<\/strong>.<\/li>
- Fill out the required information, including the serial number located on the bottom of the SPD-SX, and click Register<\/strong>.
- Keep your Sweetwater invoice handy, as you will need to enter the purchase date, method, and Dealer (Sweetwater).<\/li><\/ul><\/li><\/ol>\n\n\n\n<\/div>\n<\/div><\/div>\n\n\n\n
![\"Roland](\"https:\/\/www.sweetwater.com\/sweetcare\/media\/2020\/01\/Roland-Registration-Page-1024x540.png\")
<\/a><\/figure>\n\n\n\nClick here to register your SPD-SX with Roland. <\/em><\/p>\n\n\n\n
<\/div>\n\n\n\nReturn to top<\/a><\/p>\n\n\n\n
<\/div>\n\n\n\nSPD-SX setup and configuration<\/h2>\n\n\n\n
Your SPD-SX can connect to your live or studio rig in a variety of ways. Hooking it up and routing samples to pads is really easy so you can be making music sooner. Follow the sections below to learn how to connect it to external hardware<\/a> and to your computer<\/a>. Check out the Roland SPD-SX manual<\/a> for more setup information.
<\/p>\n\n\n\nHardware<\/p>\n\n\n\n
Audio In<\/p>\n\n\n\n
To sample or record audio, connect a dynamic microphone or playback device to the Audio In <\/em>jacks. The SPD-SX doesn\u2019t supply phantom power, so condenser microphones will not work. Make sure to connect with the input gain turned all the way down. Once connected, turn it up to set the input signal\u2019s gain level. <\/p>\n\n\n\n
\n<\/div>\n\n\n\n- Use the Gain knob on the back to adjust the input level before recording audio to the SPD-SX. <\/li>
- Open the MENU<\/strong>, and go to the SYS Settings<\/strong> to adjust the Audio In volume and routing. <\/li><\/ol>\n\n\n\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n
Footswitch<\/p>\n\n\n\n
You can connect up to two footswitches to the SPD-SX via \u00bc” TRS cables. The footswitches can control various functions such as switching between kits, turning effects on or off, and also trigger pads. Check out our guide<\/a> for instructions on how to configure the footswitches with your SPD-SX. <\/p>\n\n\n\n
\n<\/div>\n\n\n\n- Roland FS-5U<\/a> and FS-6<\/a> pedals are recommended for best performance possible. The Roland FS-5L is incompatible.<\/li>
- Depending on which pedal you are using, you may need to change the polarity settings on the SPD-SX.<\/li>
- Learn more about footswitches and external pads in the Roland SPD-SX manual<\/a>.<\/li><\/ul>\n\n\n\n
<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\nTrigger In<\/p>\n\n\n\n
You can have up to four external pads to trigger samples and change functions. Depending on which pad you\u2019re using, you\u2019ll need to change the type within the Trigger In menu. While third-party drum pads can be used, it\u2019s recommended to use compatible Roland pads<\/a> for the best performance.
<\/p>\n\n\n\n\n<\/div>\n\n\n\n- Connect two single-zone pads to the SPD-SX using a \u00bc\u201d TRS to dual TS cable<\/a>. You will then need to change the input mode within the Trigger In <\/strong>settings from HEAD & RIM <\/strong>to TRIGx2.<\/strong><\/li>
- If using an external third-party pad, go into the Trigger In <\/strong>settings and change it to PD-8<\/strong>. If you experience triggering issues, you may need to adjust sensitivity parameters afterward. <\/li><\/ul>\n\n\n\n
<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\nMIDI<\/p>\n\n\n\n
You can connect the SPD-SX to and from external devices such as drum samplers or external synthesizers via 5-pin MIDI cables<\/a>. You can also assign MIDI Program and Control Changes to external synthesizers. <\/p>\n\n\n\n
\n<\/div>\n\n\n\n- Change individual pad MIDI settings by going to the Kit settings inside the Menu.<\/li>
- For a full list of every MIDI parameter that can be changed, visit the Roland SPD-SX manual<\/a>.<\/li><\/ul>\n\n\n\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n
Outputs<\/p>\n\n\n\n
There are two sets of outputs available; the Main <\/em>outs and Sub <\/em>outs. The Mains are the primary output source, and the Sub outs are for connecting to an additional source, such as a stage monitor or a mixing board. <\/p>\n\n\n\n
\n<\/div>\n\n\n\n- Any pad and the Audio In source can all be individually routed to the Sub Out<\/em>. <\/li>
- Adjust the Sub Out volume by opening the menu, going to the SYS <\/em>settings, and selecting the Audio In\/Out <\/em>option.<\/li>
- You can assign a second sample to trigger through the Sub out, creating a layered sound. Visit our Working with Kits guide<\/a> for more information.<\/li><\/ul>\n\n\n\n
<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\nComputer<\/p>\n\n\n\n
You can record audio and MIDI data via USB cable into your DAW, or you can use the SPD-SX Wave Manager<\/strong> app to import and export samples. The SPD-SX is class-compliant on Windows, which means no additional driver software is required. macOS users will need to download an additional driver. <\/p>\n\n\n\n
\n<\/div>\n\n\n\n- Go to the SPD-SX download page<\/a>, and download the latest version of Wave Manager<\/em>. Mac users must also download the latest available driver.<\/li>
- Go to your Downloads <\/em>folder and unzip the compressed folder:
- PC<\/strong>: Right-click the .zip file, select Extract all\u2026<\/strong>, and then click Extract<\/strong>. Open the uncompressed folder, launch the installer, and follow the on-screen instructions.<\/li>
- Mac<\/strong>: Double-click the .zip file, open the uncompressed folder, launch the installer, and follow the on-screen instructions.<\/li><\/ul><\/li>
- Connect a USB cable from the Computer <\/em>port on the SPD-SX to an available USB port on your computer. For best connectivity, Roland recommends connecting it to a USB 2.0 port.<\/li>
- On the SPD-SX, press Menu<\/strong>, select Setup<\/strong> and choose Option<\/strong>. <\/li>
- Change the USB mode to one of the following:
- Wave Mgr<\/strong>: Allows you to transfer files to and from the SPD-SX via the Wave Manager app.<\/li>
- Audio\/MIDI<\/strong>: Enables audio and MIDI streaming through the USB cable so you can record the SPD-SX within your DAW. <\/li><\/ul><\/li><\/ol>\n\n\n\n
<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\nReturn to top<\/a> <\/p>\n\n\n\n
<\/div>\n\n\n\nHow to build a kit on the SPD-SX<\/h2>\n\n\n\n
There are over 200 factory Waves<\/a> (sounds) and 16 kits built into the SPD-SX, but you can also import custom samples via a USB thumb drive or through your computer. Let\u2019s create a kit to get you up and running. For in-depth info on customizing a kit, check out the Roland SPD-SX manual<\/a>. <\/p>\n\n\n\n
Change a pad sample<\/p>\n\n\n\n
\n<\/div>\n\n\n\n- While on the main screen, press the + <\/strong>or – <\/strong>button to select a kit and then play the pads to preview the sounds.<\/li>
- Press MENU<\/strong>, select PAD<\/strong> and then hit the pad you wish to change the sample.<\/li>
- Press + <\/strong>or – <\/strong>to change the sample, and then press EXIT <\/strong>two times to get back to the main screen. The changes will be automatically saved to the kit. <\/li><\/ol>\n\n\n\n
<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\nName the kit<\/p>\n\n\n\n
\n<\/div>\n\n\n\n- Press the QUICK <\/strong>button, use the DOWN <\/strong>cursor arrow to select KIT NAME<\/strong>, and then press ENTER<\/strong>.<\/li>
- Use the LEFT <\/strong>and RIGHT <\/strong>cursor arrows to choose the character you want to edit, and then use the + <\/strong>and – <\/strong>buttons to change the character.<\/li>
- Press ENTER <\/strong>to save the kit name. You\u2019ll be taken back to the main kit screen. <\/li><\/ol>\n\n\n\n
<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\nAdjust pad sensitivity and response<\/p>\n\n\n\n
Once you\u2019re happy with the sound of your new kit, you may need to optimize the sensitivity and threshold settings on the pads. That means you need to adjust the response in relationship with how hard or dynamic you play. While the factory default settings will work fine for most, you may experience mis-triggering or ghost notes depending on your playstyle. <\/p>\n\n\n\n
\n<\/div>\n\n\n\n- Press the MENU <\/strong>button, choose SETUP<\/strong> and then select PAD SENS<\/strong>.<\/li>
- Play the pad you need to adjust, and use the LEFT <\/strong>and RIGHT <\/strong>cursor buttons to change the following settings, if necessary.
- Sensitivity<\/strong>: Adjusts how sensitive the pad is when struck lightly. The higher the sensitivity, the lighter strike it will take to trigger a loud sample.<\/li>
- Threshold<\/strong>: Adjusts when the sample is triggered at a specific velocity. A higher threshold level means you must play harder to trigger the sound.<\/li><\/ul><\/li>
- Velocity Curve<\/strong>: Changes the relation between the velocity and volume of the sample. This is particularly useful when you want more natural dynamics for a pad. <\/li><\/ol>\n\n\n\n
<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\nReturn to top<\/a> <\/p>\n\n\n\n
<\/div>\n\n\n\nAdditional resources<\/p>\n\n\n\n
- Roland SPD-SX Download page<\/a><\/strong><\/li>
- Roland SPD-SX User Manual<\/a><\/strong><\/li>
- Roland SPD-SX USB Flash Drive Compatibility List<\/a><\/strong><\/li>
- Roland SPD-SX Turbostart Guide<\/a><\/strong><\/li><\/ul>\n\n\n\n
<\/p>\n\n\n\n
<\/p>\n","protected":false},"featured_media":1758895,"template":"","categories":[142726],"tags":[34329,53950,54264,69284,34717,34739,34740,36524,54235,55063,124058,34750],"storecat":[],"itemids":[13877,178225],"manufacturers":[],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\t\n
- Roland SPD-SX User Manual<\/a><\/strong><\/li>
- Threshold<\/strong>: Adjusts when the sample is triggered at a specific velocity. A higher threshold level means you must play harder to trigger the sound.<\/li><\/ul><\/li>
- Play the pad you need to adjust, and use the LEFT <\/strong>and RIGHT <\/strong>cursor buttons to change the following settings, if necessary.
- Use the LEFT <\/strong>and RIGHT <\/strong>cursor arrows to choose the character you want to edit, and then use the + <\/strong>and – <\/strong>buttons to change the character.<\/li>
- Press MENU<\/strong>, select PAD<\/strong> and then hit the pad you wish to change the sample.<\/li>
- Audio\/MIDI<\/strong>: Enables audio and MIDI streaming through the USB cable so you can record the SPD-SX within your DAW. <\/li><\/ul><\/li><\/ol>\n\n\n\n
- Mac<\/strong>: Double-click the .zip file, open the uncompressed folder, launch the installer, and follow the on-screen instructions.<\/li><\/ul><\/li>
- Go to your Downloads <\/em>folder and unzip the compressed folder:
- Adjust the Sub Out volume by opening the menu, going to the SYS <\/em>settings, and selecting the Audio In\/Out <\/em>option.<\/li>
- Any pad and the Audio In source can all be individually routed to the Sub Out<\/em>. <\/li>
- If using an external third-party pad, go into the Trigger In <\/strong>settings and change it to PD-8<\/strong>. If you experience triggering issues, you may need to adjust sensitivity parameters afterward. <\/li><\/ul>\n\n\n\n
- Roland FS-5U<\/a> and FS-6<\/a> pedals are recommended for best performance possible. The Roland FS-5L is incompatible.<\/li>
- Name the kit<\/a><\/strong><\/li>
- Computer<\/a><\/strong><\/li><\/ul><\/li>
- SPD-SX setup and configuration<\/a><\/strong>