{"id":1724302,"date":"2014-12-10T16:09:08","date_gmt":"2014-12-10T16:09:08","guid":{"rendered":"http:\/\/www.sweetwater.com\/sweetcare\/?post_type=articles&p=1724302"},"modified":"2014-12-11T14:28:15","modified_gmt":"2014-12-11T14:28:15","slug":"presonus-studio-live-rm-series-firmware-update-procedure","status":"publish","type":"articles","link":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/presonus-studio-live-rm-series-firmware-update-procedure\/","title":{"rendered":"PreSonus Studio Live RM series firmware update procedure"},"content":{"rendered":"

NOTE:\u00a0<\/strong>It is highly suggested that when doing firmware updates or the Firmware Recovery process that you complete this process with a Sandisk drive as mentioned on the below knowledge base article. \u00a0Not all flash drives will be able to complete this process correctly, and the suggested drives have been tested well to complete this process.\u00a0SanDisk Cruzer USB Flash Drive Compatibility with StudioLive AI<\/a><\/strong><\/em><\/p>\n

    \n
  1. Download the lastest firmware files for you mixer and please review all instructions before updating your mixer.\n
  2. Open your downloads folder and locate the StudioLive firmware folder. The folder will be named with your mixer\u2019s model number and the new firmware version (e.g., RM32AI_v5550).\"\"<\/li>\n
  3. Depending on your system preferences, the firmware folder may not automatically uncompressed from the .zip file. To expand it, simply double-click it.\"\"<\/li>\n
  4. Open the firmware folder; you will find five files inside:
    \n– Initvars.scr
    \n– Recovery.scr
    \n– Rootfs.img
    \n– uImage
    \n– upgrade.binYou will need all five files to upgrade your mixer.<\/strong><\/em><\/li>\n
  5. \"\"<\/li>\n
  6. Connect a FAT32-formatted USB thumb drive to your computer.
    \n
    \nPower User Tip:\u00a0Most small USB drives (16 GB or less) are already formatted correctly, so no formatting is required. If your mixer does not detect your thumb drive, verify that it is formatted correctly. \u00a0Also, it is important that you use a drive no smaller than 1 GB and no larger than 32 GB in size.<\/em><\/em> <\/p>\n

    \"\"<\/li>\n

  7. Select all five firmware files and either copy\/paste or drag them to the root of your thumb drive. Eject your drive and disconnect it from your computer.\"\"<\/li>\n
  8. Remove your WiFi LAN adapter (if inserted) and insert the thumb drive into the USB slot on the front of your RM Series mixer and make sure to power the mixer “Off.”<\/li>\n
  9. Remove the Option card on the back of the mixer. \u00a0A screwdriver might be necessary to remove the spring-loaded thumb screws on the back of the unit. \u00a0Then, power the mixer on.\u00a0\"Option-card\"<\/a>Note:\u00a0A progress bar will be shown on the front LED bars while your mixer\u2019s firmware is being loaded. Once it is complete, the LED bars will become green and you will want to power off the mixer.\n

    \n\t\t