{"id":1723081,"date":"2014-05-05T13:31:59","date_gmt":"2014-05-05T13:31:59","guid":{"rendered":"http:\/\/www.sweetwater.com\/sweetcare\/?post_type=articles&p=1723081"},"modified":"2014-05-05T13:31:59","modified_gmt":"2014-05-05T13:31:59","slug":"how-do-i-update-the-firmware-on-my-moog-minitaur-on-a-mac","status":"publish","type":"articles","link":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/how-do-i-update-the-firmware-on-my-moog-minitaur-on-a-mac\/","title":{"rendered":"How do I update the firmware on my Moog Minitaur on a Mac?"},"content":{"rendered":"

***Please back up your presets before updating the firmware on your Moog Minitaur. The firmware update process will delete all data on your Minitaur.<\/p>\n

First, click here<\/a> to download the latest firmware for the Minitaur. Be sure to choose the download that matches your operating system.<\/p>\n

Before you begin the update, you’ll need to install SysEx Librarian. The installer for this is included in the Minitaur firmware update download.<\/p>\n

\"Screen<\/p>\n

Once the SysEx Librarian is installed, follow the instructions below to update the firmware on your Minitaur:<\/p>\n

    \n
  1. With the Minitaur powered OFF, connect it to your computer with \u00a0USB cable.<\/li>\n
  2. Power up the Minitaur while holding down the VCO 1 and 2 waveform switches. Do not release the switches.<\/li>\n
  3. While still holding the VCO 1 and 2 waveform switches, press the Release switch. Now you can release all three switches. The Glide switch should be blinking slowly.<\/li>\n
  4. Open the SysEx Librarian application that you installed earlier.<\/li>\n
  5. Click the Destination pull-down menu and select Moog Minitaur.<\/li>\n
  6. Drag and drop the two .syx files into the SysEx Librarian window. The files will be added to the SysEx Librarian playlist.<\/li>\n
  7. In the SysEx Librarian window, select “Minitaur_Erase_FW_Cmd.syx” and press the Play button at the top left. You should see the Glide switch turn off, the MIDI light flash, and the VCO 1 switch LED blink several times while the system file is erased. When the erasing is complete, the Glide switch will blink again.<\/li>\n
  8. Next, go back to the SysEx Librarian window and select “Minitaur_firmware_v2_1_0.syx and press the Play button at the top left. The VCO 2 waveform switch LED will blink as the unit receives the new firmware.<\/li>\n
  9. When the process is complete, the Minitaur will reboot with update functionality.<\/li>\n<\/ol>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[53763,34259,68203,66849,53762],"storecat":[],"itemids":[9148],"manufacturers":[33562],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n