You can set up direct monitoring on your Focusrite Scarlett 2i2 two ways: either mono<\/strong><\/a> <\/strong>or stereo<\/strong><\/a>. When the Focusrite direct monitor is set to mono<\/strong>, one signal is sent to both the L and R outputs. When set to stereo<\/strong>, input 1 is sent to the L output and input 2 is sent to the R output. \u00a0If you only want to hear your direct source and not the monitor signal from your DAW, you\u2019ll need to mute the channel that you\u2019re monitoring from within your DAW. Focusrite\u2019s Direct Monitor<\/em> switch on the Scarlett 2i2 does not disable the feed from your DAW. Rather, the Focusrite direct monitor toggles whether you hear your input source directly before it goes to your DAW. When you toggle direct monitoring on your Scarlett 2i2, make sure that the input isn\u2019t being sent to the same output. If you do, you\u2019ll hear an echo. If you only want to hear your direct source and not the monitor signal from your DAW, you\u2019ll need to mute the channel that you\u2019re monitoring from within your DAW. <\/p>\n","protected":false},"featured_media":0,"template":"","categories":[1],"tags":[54894,56785,53815],"storecat":[],"itemids":[12631],"manufacturers":[33367],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n
<\/p>\n\n\n\n