Please go through the following checklist before updating the flash memory of your Variax guitar to ensure the update completes successfully:<\/p>\n
Updating or re-installing the flash memory on the\u00a0<\/strong>Variax Electric 300, 500, 600, 700 and James Tyler Variax guitars:<\/strong><\/p>\n These instruments can only be returned to factory reset by reinstalling the flash memory. You will need to connect your Variax to the workbench software using your Variax enabled hardware (i.e. Variax Hardware interface, POD XT\/X3 Live, POD X3 Pro, VETTA with VDI, or POD HD500), then you will have to connect your interface to your computer via USB.\u00a0 Once the guitar and interface are connected to the computer, you will need to run Line 6 Monkey.<\/p>\n 1) Once you run Line 6 Monkey, Monkey may ask you to register.\u00a0 If you do not wish to register (or have already registered) select “remind me later”.<\/p>\n 2) If you want to reinstall the factory presets (or update the firmware), select “Flash Memory” the select “Reinstall Latest”<\/p>\n 3) Select “OK” to agree to the software license<\/p>\n 4) Select “yes” or “no” If you want to keep the patches on the instrument<\/p>\n 5) Select “Yes”\u00a0 to continue with the update.\u00a0\u00a0Do not<\/strong>\u00a0disconnect the variax during the update.<\/p>\n 6)\u00a0 Line 6 Monkey will reinitialize the device and update the flash memory. You can watch the progress on the blue bar on the right side of Monkey.<\/p>\n 7) Once the update is complete you will need to select “OK” to continue.<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[1],"tags":[54159,115950,54636,54635,54153,53762,35950],"storecat":[],"itemids":[],"manufacturers":[33501],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n