Create a new preset, starting from scratch by adding individual Synths:<\/p>\n
1. First, we want to clear out the system of any presets that are already loaded. To do this, turn
\nthe bottom knob counter-clockwise until you see Tag: (none) and (New Empty Preset) as the preset
\nname. Press the encoder button to load this empty preset.<\/p>\n
2. Now let’s select a Synth preset into one of the two Synth channels. With the PLAY mode lit, we
\npress the SNTH 1 button. You’ll notice it too says (Empty) and Tag: (none).Turn the bottom knob to
\nfind the sound you want. For example, let’s choose “Electric Piano 1” from the “TAG: Electric Pianos.”
\nPress the knob to load it.<\/p>\n
3. Now we’ll layer that with another sound\u2014say a pad synthesizer. To do this, we press the SNTH 2
\nbutton and load a different sound. Select “Analog Pad 2” from the “TAG:Synth Pads” category. Press
\nthe knob to load this preset. Now press the “PLAY” button to hear both sounds combined together.<\/p>\n
4. What we’ve done is layered the Electric Piano 1 and the Analog Pad 2 sounds together, which
\ncreates an entirely new sound. You can adjust the volume of either sound by pressing MIX and
\neither SNTH 1 or SNTH 2 to adjust the Electric Piano 1 or Analog Pad 2 volume level respectively.<\/p>\n
5. Pressing either SNTH 1 or SNTH 2 solos just that one sound. If you want to SAVE this
\ncombination of sounds, simply press and hold the EDIT button, and you can save this preset to the
\nUSER TAG.<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[9673],"manufacturers":[33572],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\t\n