The FD-7 control pedal can be used with the SPD-S to control various parameters. Use the following steps to set the FD-7 (or a Boss FS-5U) to control the “open and close” type of performance from a hi-hat sound:<\/p>\n
1. Connect the FD-7 to the FOOT SW input on the SPD-S.<\/p>\n
2. Press SETUP (“SYSTEM” shows in the display).<\/p>\n
3. Press ENTER.<\/p>\n
4. Press PAGE Right [>] five times to select “FootSwPolarity.”<\/p>\n
5. Press (-) to choose “FootSwPolarity -.”<\/p>\n
6. Press EXIT once (\u201cSYSTEM\u201d shows in the display).<\/p>\n
7. Press PAGE Right [>] twice to select “CONTROL SW.”<\/p>\n
8. Press ENTER.<\/p>\n
9. Step on the FD-7 so the FOOT SW 1 light flashes.<\/p>\n
10. Use the + \/ – buttons to select “WAVE SW.” This set up allows the FD-7 to choose between the WAVE A and WAVE B sounds.<\/p>\n
Now we’ll assign the open and closed hi-hat sounds to a pad:<\/p>\n
1. Press PATCH.<\/p>\n
2. Use + \/ – to select a desired patch.<\/p>\n
3. Press EDIT (“WAVE A” shows in the display).<\/p>\n
4. Press ENTER.<\/p>\n
5. Strike the pad to be assigned.<\/p>\n
6. Use + \/ – to select “i164>AcuHH op.”<\/p>\n
7. Press EXIT once.<\/p>\n
8. Press PAGE Right [>] once to select “WAVE B.”<\/p>\n
9. Press ENTER.<\/p>\n
10. Use + \/ – to select “Wave Sw FOOTSW.” <\/p>\n
11. Press PAGE Right [>] once.<\/p>\n
12. Use + \/ – to select “i163>AcuHH cl.”<\/p>\n
13. Press EXIT.<\/p>\n
14. Press PAGE Left [<] once to select \"WAVE A.\" \n\n15. Press ENTER.\n\n16. Step on the FD-7 so the FOOT SW 1 light flashes.\n\n17. Use + \/ – to select “i165>AcuHH ft.”<\/p>\n
18. Press EXIT.<\/p>\n
Now we’ll set the FD-7 to cut off or “close” the open hi-hat sound. To do so, the pad and the pedal must be set to the same “MUTE GROUP.”<\/p>\n
1. While still in patch edit, press PAGE Right (>) to select “PAD CONTROL.”<\/p>\n
2. Press ENTER.<\/p>\n
3. Press PAGE Right (>) three times to select “Mute Group.”<\/p>\n
4. Strike the same pad that was previously selected in step #5 above.<\/p>\n
5. Use + \/ – to select a desired mute group number (1 – 9).<\/p>\n
6. Press the FD-7 and choose the same number.<\/p>\n
Note: The PAD number will be lit and FOOT SW 1 should flash. If other pads are sharing the same mute group, they will also be lit. If so, choose a number that only the pad and the FD-7 share.<\/p>\n
7. Press EXIT twice or PATCH to return to PATCH mode.<\/p>\n
<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[],"manufacturers":[33684],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\t\n