A Performance can be created as a Split, for playing two Voices in separate Note Ranges. This method allows the user to set up different Splits for each Performance. <\/p>\n
NOTE: If there is a PLG100XG Plug-in Board installed in the unit, the XG Voices in Parts 17-32 will normally be doubling the Voices in Parts 1-16. To avoid this, Parts 17-32 must be muted via MIDI, or manually on the instrument. (Only Parts 17 – 18 need to be muted for this example.) Click here for ‘Muting and Resetting a PLG100XG Plug-in Board in a CS6X’. <\/p>\n
Initializing a Performance: <\/p>\n
TIP: When creating a new Performance setup, it is helpful to first clear the settings by initializing the Performance. Click here for ‘Initializing a Performance on a CS6X’ <\/p>\n
Setting up a Split: <\/p>\n
1) Press the [PERFORM] button to enter Performance Mode. <\/p>\n
2) Press the [EDIT] button. The LED next to it will illuminate. <\/p>\n
3) Turn the (PAGE) knob to select the ‘MIX Vce’ page. <\/p>\n
4) Turn the (A) knob to select ‘Part01’. <\/p>\n
5) Use the (B) and (C) knobs to select the left-hand Voice. <\/p>\n
6) Turn the (PAGE) knob to select the ‘LYR Limit’ page. <\/p>\n
7) Use the (B) and (C) knobs to set the lower and upper ‘Note Limit’ for the lower section of the Split. <\/p>\n
8) Turn the (PAGE) knob to select the ‘MIX Vce’ page. <\/p>\n
9) Turn the (A) knob to select ‘Part 02’. <\/p>\n
10) Use the (B) and (C) knobs to select the right-hand Voice. <\/p>\n
11) Turn the (PAGE) knob to select the ‘LYR Limit’ page. <\/p>\n
12) Use the (B) and (C) knobs to set the lower and upper ‘Note Limit’ for the upper section of the Split. <\/p>\n
13) Turn the (PAGE) knob to select the ‘LYR Mode’ page. <\/p>\n
14) Turn the (1) knob in the ‘ASSIGNABLE KNOB’ group to turn the ‘Layer’ switch to ‘ON’.
Reference: Owner’s Manual, p. 119-123 <\/p>\n
Storing a Performance to Memory: <\/p>\n
NOTE: To save this Performance setup for future use, it should be stored to the Internal memory or a SmartMedia Card (External memory). <\/p>\n
1) Press the [STORE] button. <\/p>\n
2) Turn the (1) knob to select Internal or External memory. <\/p>\n
3) Turn the (2) knob to select the destination Performance number. <\/p>\n
4) Press the [ENTER] button. <\/p>\n
WARNING: The next step will overwrite the Performance currently in the destination number. <\/p>\n
5) Press the [INC\/DEC] button to store the Performance.
Reference: Owner’s Manual, p. 141 <\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[20255],"manufacturers":[115924],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n