1) Press the [SEL] button of the channel where an insert is to be set. <\/p>\n
NOTE: The AW4416 will need to be in the appropriate mixing layer. <\/p>\n
2) Press the [VIEW] button. <\/p>\n
3) Press the [F1] button. <\/p>\n
4) Use the ‘CURSOR’ buttons to select ‘ASSIGN’ in the ‘EFFECT INSERT’ section of the display.<\/p>\n
5) Press the [ENTER] button. The ‘EFFECT INSERT SETTING’ popup window will be displayed. Figure 1: AW Effects Insert Pop . <\/p>\n
6) Use the ‘CURSOR’ buttons to select ‘EXTERNAL’ in the ‘EFFECT INSERT SETTING’ popup window. <\/p>\n
7) Press the [ENTER] button. <\/p>\n
8) Use the ‘CURSOR’ buttons to select the ‘SEND’ parameter in the ‘EFFECT INSERT SETTING’ popup window. <\/p>\n
9) Use the (DATA\/JOG) wheel to select the ‘SEND’ output. <\/p>\n
NOTE: The ‘SEND’ output can be any of the ‘OMNI’ outputs, any of the Card Slot outputs, the ‘DIGITAL STEREO OUT’ or the ‘ANALOG STEREO OUT’. <\/p>\n
TIP: Once a ‘SEND’ output is selected, no other inputs, busses or auxiliaries can be assigned to that output. <\/p>\n
10) Connect the ‘SEND’ output jack that was selected in the previous step to the input of the external device. Figure 2: AW Insert Connection Diagram . <\/p>\n
11) Use the ‘CURSOR’ buttons to select the ‘RTN’ parameter in the ‘EFFECT INSERT SETTING’ popup window. <\/p>\n
12) Use the (DATA\/JOG) wheel to select ‘RETURN’ input. <\/p>\n
13) Connect the output of the external device to the ‘RETURN’ input that was selected in the previous step. Figure 2: AW Insert Connection Diagram . <\/p>\n
14) Use the ‘CURSOR’ buttons to select ‘OK’ in the display. <\/p>\n
15) Press the [ENTER] button. <\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[19232,19235],"manufacturers":[115924],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n