Requires Version 2.19 or above. <\/p>\n
In an effort to support more and newer CD-ROM drives with the CD-Player function, Roland has added 7 additional drivers into the S-760’s system software versions 2.19 and higher. <\/p>\n
If your CD-ROM player does not work with the CD Player function, this new system may be able to support the drive by allowing you to try several common audio CD drivers. <\/p>\n
* While you are performing the following procedure, it is possible that the S-760 or CD-ROM drive might malfunction, causing the S-760 to lock up. Be sure to save any data in the S-760 to disk before attempting this operation. <\/p>\n
To Enable the CD-Player Function with the New System Disk: <\/p>\n
1. Restart the S-760 with the new system disk (2.19 or higher).
2. Go to the System Mode, and select the SCSI page.
3. Set the CDP Drive Type to 1. <\/p>\n
Using the CD-Player Function: <\/p>\n
LCD + Front Panel
1. Insert an audio CD into your CD-ROM drive.
2. Go to the Performance Play page.
3. Press the Command button.
4. Use the CURSOR buttons to select 8: CD Player and press S1\/Dec to display the CD Player page.
5. Press S1\/DEC (list button). A list of the SCSI devices connected to the S-760 will be displayed.
6. Move the cursor to the SCSI ID of your CD-ROM drive and press S1\/DEC (sel). The CD-ROM drive will be selected as the current drive. <\/p>\n
CRT + Mouse
1. Insert an audio CD into your CD-ROM drive.
2. Go to the Performance Play page.
3. Click on Com (Command) in the right upper corner.
4. A list of Performance functions will be displayed. Click on CD Player to display the CD Player page.
5. Click on “CD-ROM” or “???”. A list of the SCSI devices connected to the S-760 will appear.
6. Click on the desired CD-ROM drive on the list. The CD-ROM will be selected as the current drive.<\/p>\n
LCD + Front Panel & CRT + Mouse
7. The new driver that you have selected may be able to display Track, A-Time and P-Time when using the CD-Player function. Try the CD Player function using the transport controls on the screen (if you are using a monitor) or the F2 button (if you are using the front panel and LCD). If the Track, A-Time and P-Time are not displayed or the functions lock up, try another audio CD driver, repeat the above steps, and try again. <\/p>\n
After you find the correct driver for your CD-ROM be sure to update your System Parameters using the System Save\/Load Parameters screen in the System Mode. <\/p>\n
* Make sure to connect the audio outputs of your CD-ROM drive to the inputs of the S-760 to sample your audio CD. <\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[34117],"storecat":[],"itemids":[],"manufacturers":[33684],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n