“E CLOC” or “ECLOC” : No clock is coming in from source
– When referencing external BNC word clock, check word clock cable and the word clock source. Make sure sample rates match.
– When slaved to another DTRS, check the PW88s sync cable and\/or try another cable. Also make sure the master machine is not showing an ECLOC message.<\/p>\n
“E t. cut” or “Etcut” : the tape inside the unit is broken.<\/p>\n
“E. dio” or “Edio” : not getting TDIF input. Check PW88 inputs and make sure source is sending TDIF out.<\/p>\n
“EdE” or “E. dEu” : Condensation has occurred on the head drum. Leave the unit on for 1-2 hours. The naturally occurring heat produced inside the unit will promote drying. <\/p>\n
“E Hi-8t” or “EHI-8” : A tape that is not Hi-8 is loaded in the machine. Use only Hi-8 tapes.<\/p>\n
“Ethint” : tape is too thin for the machine (less than 8.5 #μm) is loaded. Use 120 minute or shorter tapes.<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[34387,33901],"storecat":[],"itemids":[20678,20670],"manufacturers":[33792],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n