{"id":14134,"date":"2002-03-26T00:00:00","date_gmt":"2002-03-26T00:00:00","guid":{"rendered":"http:\/\/www.sweetwater.com\/sweetcare\/?p=14134"},"modified":"2007-04-27T00:00:00","modified_gmt":"2007-04-27T00:00:00","slug":"there-easy-example-of-signal-flow-of-dm24","status":"publish","type":"articles","link":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/there-easy-example-of-signal-flow-of-dm24\/","title":{"rendered":"Is there an easy example of the signal flow of the DM24?"},"content":{"rendered":"

DM-24 SIGNAL FLOW
The first 24 channels of the DM-24 can accept “INPUTS” or “RETURNS.” These assignments are made on the I\/O page. Use the cursor keys to highlight the virtual patch cable then use the data wheel to make the proper assignment. In this example M\/L 1 is an “input” and TDIF1-1 is a “return.” Channels 25-32 are Input-only channels. They cannot have “RETURNS” assigned to them. TDIF I\/O, ADAT lightpipe I\/O and any option slot I\/O are not available to channels 25-32. In mixdown mode channels 25-32 would normally be used for internal effects returns and assignable returns. There is a “Mixdown” snapshot in ROM where channels 25-32 are assigned in just this manner.
INPUTS
“Inputs” include: mic\/Line inputs, digital inputs 1 and 2 (2 CH. AES\/EBU and S\/PDIF inputs), internal effects returns and assignable returns. All of these inputs can be assigned to any of the 32 channels. For instance, mic\/line input #2 can be assigned to channel 23, digital input #1 can be assigned to channel 2 and so on.
RETURNS
“Returns” include TDIF I\/O, ADAT lightpipe I\/O and any option slot I\/O that might be added to the DM-24. “Return” is named such because it is short for “tape return.” Technically a “tape return” is an “input”, but understanding the idiosyncrasies of the DM-24 are necessary if one wishes to operate the DM-24 properly. An analog option card might be used to add more analog “inputs” to the DM-24. Even though the benefit for the user is more “inputs”, the DM-24 thinks of the option cards as “returns.” Keeping these terms clear is the key to understanding the signal flow of the DM-24.
When channels 1-24 are used for “returns”, there are options as to which “return” interfaces are to be used. There are 24 channels of TDIF I\/O and 8 channels of ADAT lightpipe I\/O built in, but there are also two option slots available to expand your I\/O capabilities. All of these “returns” cannot be used simultaneously because there are only 24 channels available to them. “Return” interface choices must be made in the following manner:
TDIF 1 or SLOT 1
TDIF 2 or SLOT 2
TDIF 3 or ADAT
Once the preferred “return” interfaces have been selected, they can be assigned to channels 1-24 in groups of eight. For instance:
Slot 1 to channels 17-24
TDIF 2 to channels 1-8
ADAT to channels 9-16<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[21078],"manufacturers":[33792],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n