{"id":14102,"date":"2002-03-22T00:00:00","date_gmt":"2002-03-22T00:00:00","guid":{"rendered":"http:\/\/www.sweetwater.com\/sweetcare\/?p=14102"},"modified":"2007-04-27T00:00:00","modified_gmt":"2007-04-27T00:00:00","slug":"begin-choose-inputs","status":"publish","type":"articles","link":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/begin-choose-inputs\/","title":{"rendered":"How do I begin to choose the inputs?"},"content":{"rendered":"

Select mic\/line inputs as the signal sources for channels 1 through 16.
1With the SHIFT indicator lit, press the I\/O
key and then soft key 1.
2Ensure that the “patchcords” linking the sig-nal
sources to the channels, all connect the
appropriate M\/L (mic\/line) boxes with the
channels, as shown here.
If they do not (they are linking the lower
alternative source (return) to the channel):
Use the cursor keys to highlight the on-screen
patchcord.
Use the dial to “repatch” the channel input.
Press ENTER.
Press the CH 1-16 LAYER STATUS key
followed by the SELECT key for CH 1.
Using the assign keys to the left of the
display assign CH 1to DIRECT out. Make
sure that none of the other assignment keys
are lit. Make sure channels 2-16 are
assigned the same way.<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[21078],"manufacturers":[33792],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n