The JV-2080 allows some of the internal effect algorithms to be synced with external MIDI clock. For example, you can set delay times to sync to the tempo of your song. This is a real time-saver because it saves you from having to adjust the settings manually. The JV-2080’s effect settings will be controlled by the tempo of your sequencer.<\/p>\n
Use the following procedure to sync “19:TRIPLE-TAP-DELAY” to an external clock: <\/p>\n
1. Press PERFORM.
2. Press F5[EFFECTS] to display the Effects page.
3. Press F2[EFX Prm] to display the Effects Parameter page.
4. Use the CURSOR buttons to select “Delay Center.”
5. Use the VALUE dial to select “e” (an eighth note value).
6. Use the CURSOR buttons to select “Delay Right.”
7. Use the VALUE dial to select “e” (an eighth note value).
8. Use the CURSOR buttons to select “Delay Left.”
9. Use the VALUE dial to select “x” (a sixteenth note value).
10. Press PERFORM.
11. Press F2[WG] to display the Wave Parameter page.
12. Use the CURSOR buttons to select “Clock Source.”
13. Use the VALUE dial to select “SYSTEM.”
14. Press SYSTEM.
15. Press F1[SETUP] to select the Setup parameter page.
16. Use the CURSOR buttons to select “Clock Source.”
17. Use the VALUE dial select “MIDI.”
The following effects can be configured so that they sync to an external MIDI clock:
16:STEP-FLANGER
19:TRIPLE-TAP-DELAY
20:QUADRUPLE-TAP-DELAY<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[34715],"storecat":[],"itemids":[],"manufacturers":[33684],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n