Starting from Internal Voices mode:<\/p>\n
1. Press the Internal Voices button. Choose the Program you want for the first zone. You can select it by using the alpha wheel, the + and – buttons, or the numeric keypad. (The programs and their numbers are listed in Appendices A & B in the manual.) Or you can use the Sound Select and Next\/Previous Group buttons, as described at the beginning of this document.<\/p>\n
2. Press Split (the Zone 3 button). Notice that the Mode buttons change and MIDI Setups is now lit instead of Internal Voices (since we now have 2 zones). Also notice that the top of the display says Zone:3 auto, indicating that Auto Split\/Layer is turned on. Play the keyboard. You should hear the two sounds split across the keyboard. <\/p>\n
3. Notice that if you press the sustain pedal when playing both sides of the split, both sides sustain. Although this might be fine in some circumstances, often you won’t want this. For example, if you create a piano and bass split, you will probably want the piano part to sustain, but not the bass. <\/p>\n
Hold the Controllers button and step on the sustain pedal. The display jumps to show Zone:3 SwitchPdl1, On Ctrl: 64 Sustain. Press 0, then Enter to set it to None. Now play the keyboard and notice how the sound in zone 1 will sustain but the sound in zone 3 does not.<\/p>\n
4. If you would like to change where the keyboard is split, you can easily do this. Press the Split and Split Layer buttons simultaneously. The display changes to show you the AutoSplit Key, which is currently G#3. The easiest way to change the key is to hold the Enter button and strike the note that you want on the keyboard. This will be the top note of the left side of the keyboard. You can also use the wheel or + and – buttons to change the value. <\/p>\n
5. Go through steps 7 and 8 in tutorial #1 to name and save your Setup.<\/p>\n
Starting from MIDI Setups mode:<\/p>\n
1. Go through steps 1-3 (in the section on starting from MIDI Setups) in tutorial #1.<\/p>\n
2. Press the Key Range button. The display will show the key range for zone 1, from C-1 to G9. (C4 is middle C on the keyboard.) You are going to make zone 1 be the right side of the split, so you need to change the lowest note for this zone. The cursor is already under the Low Note parameter. So, simply press and hold the Enter button, then strike the key on the keyboard that you want to be the lowest note for the right side of the split. The display will change to show that note.<\/p>\n
3. Go through steps 4 and 5 in tutorial #1 to create the second part of your split.<\/p>\n
4. Press the Key Range button. Since zone 2 is the left side of your split, you need to change the high note so that it doesn’t overlap with zone 1. Press the >> to move the cursor to the High Note parameter. Press and hold the Enter button, then strike the note on the keyboard that is one note lower than the note you chose for the lowest note in zone 1. Play the keyboard. You should hear the two sounds split at the notes you chose.<\/p>\n
5. Notice that if you press the sustain pedal when playing both sides of the split, both sides sustain. Although this might be fine in some circumstances, often you won’t want this. For example, if you create a piano and bass split, you will probably want the piano part to sustain, but not the bass. <\/p>\n
Hold the Controllers button and step on the sustain pedal. The display jumps to show Zone:2 SwitchPdl1, Sw Type:Momentary. Press the >> to get to the On Control parameter for Switch Pedal 1. Currently it is set to Sustain. Press 0, then Enter to set it to None. Now play the keyboard and notice how the sound in zone 1 will sustain but the sound in zone 2 does not.<\/p>\n
6. Go through steps 7 and 8 in tutorial #1 to name and save your Setup.<\/p>\n
You can easily add zones 3 and 4 using the same methods. Each zone can be set to any range of notes, so you can have various zones layered while they are split with other zones. Or create a 3 or 4 way split. Or overlap the zones only partially. <\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[27096],"manufacturers":[33482],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n