For Logic as the Master<\/p>\n
connections –
make sure that your MIDI in and out is connected both ways to your MIDI interface into your computer…<\/p>\n
Logic settings –
1) Click on “open arrange” in the Windows menu
2) Click on “Midi options” in the Options sub menu
3) Click on the “Transmit MTC” so it has an X in the box
4) Click on “MIDI machine control” so there is not an X in the box
5) Click on “OK”
6) Click on “Synchronization” in the Options menu
7) Click on “General” and click on “Intern” from the Sync Mode pop-up menu
8) Click on “30” in the Frame Rate (fps) pop up menu, click on the 30 button. Click on OK<\/p>\n
Press Play on the VS and it will start to blink. Now you can click on Play in Logic and the VS will begin playing back as well<\/p>\n
VS1880 settings<\/p>\n
1) Hold (shift) and press (ext sync)
2) Move the Cursor to Sync Source and use the TIME\/VALUE dial to select EXT
3) Move the cursor to Sync MTC TYPE and use the TIME\/VALUE to dial to select “30”
4) Press (Play (display)) to return to the playlist display…<\/p>\n
For the VS1880 as the Master<\/p>\n
Logic settings –
1) Click on “open arrange” in the Windows menu
2) Click on “Midi options” in the Options sub menu
3) Click on “Autosync In” so it has an X in the box
4) Click on “OK”<\/p>\n
VS1880 settings –
1) Hold (shift) and press (ext sync)
2) Move the cursor to Sync Source and use the TIME\/VALUE dial to select “INT”
3) Move the cursor to Sync GEN and use the TIME\/VALUE dial to select “MTC”
4) Press (F6 (Exit) ) the press (F4 (MIDI) )
5) Move the cursor to MIDI Thru and use the TIME\/VALUE dial to select “OUT”
6) Press (Play (Display) to return to the playlist display<\/p>\n
Press Play on the VS and Logic will Play in sync with the VS. Logic will automaticcally recognize the frame…<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[32596,32600,32614],"manufacturers":[33684],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n