On the VM3100Pro mixer, hit F1 while holding Shift, then press Yes to load Logic setup.<\/p>\n
In LogicRPC, Open the VM3100Pro Template and Save As autoload. This will open up the mixer’s template every time Logic is opened.<\/p>\n
To operate the faders in Logic from the mixer, select Midi CH on the mixer, and faders 1-8 will work. Use the Logic on-screen buttons to select the other banks.<\/p>\n
The default assignment is to assign track 1 to output 1, track 2 to output 2, track 3 to output 3, and so on. In this configuration, you must turn up all audio channels (on the mixer) 13-20 you wish to use as outputs. You may wish to assign all audio tracks to outputs 1-2 so you’ll only have to turn up channels 13 and 14. This will not affect the fader controls.<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[30985],"manufacturers":[33684],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n