1.Launch Jam.<\/p>\n
2.Determine how many Track ID’s you will need use for the entire Audio File.<\/p>\n
3.Lets say you need 10 Track ID’s for 10 different positions within the Audio File.
Click the “Add Track” button and add the Audio File.Click “OK” when done.<\/p>\n
4.Now keep adding the SAME Audio File as many times as you need for the amount ofTrack ID’s. Example: If you need 10 Track ID’s , add the SAME Audio File 10 Times!<\/p>\n
VERY IMPORTANT!!! MAKE SURE YOU SET THE “PAUSE” TIME TO 00:00:00 FOR EACH TRACK (EXCEPT TRACK 1, THAT NEEDS TO BE SET AT 00:02:00!!!!!!<\/p>\n
5.Now you can alter the START and STOP point for each Track. You do this by choosing a track, then click and hold on its current “Length” time (the numbers) , then choose “Sound Data Trim” , and alter the START and STOP time as needed.<\/p>\n
6.So…..Track 1 will Start normally but will END wherever you want the next Track ID to Start!
Now Start Track 2 where Track 1 ended!
Example: <\/p>\n
Track 1 STARTS at 00:00:00 and will end at 03:41:50.
Track 2 STARTS at 03:41:51 and will end at wherever the Track ID 3 needs to be!<\/p>\n
7.Keep doing this until your playlist is completed , and then SAVE! (You don’t want to loose all of this work!) <\/p>\n
8.Press the “Write Disc” button and your on your way to a uninterrupted CD complete with Track ID’s!!!<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[1],"tags":[],"storecat":[],"itemids":[7182],"manufacturers":[33158],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n