{"id":11286,"date":"2001-09-13T00:00:00","date_gmt":"2001-09-13T00:00:00","guid":{"rendered":"http:\/\/www.sweetwater.com\/sweetcare\/?p=11286"},"modified":"2007-04-27T00:00:00","modified_gmt":"2007-04-27T00:00:00","slug":"set-up-1642-vlz-pro-record-adat","status":"publish","type":"articles","link":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/set-up-1642-vlz-pro-record-adat\/","title":{"rendered":"How should I set up my 1642-VLZ PRO to record on my ADAT?"},"content":{"rendered":"

A: There are a couple different ways to accomplish this. For direct-recording\/split monitoring, use the direct outs 1-8 on theCR1604-VLZ® to the inputs 1-8 on the ADAT. Outputs from the ADAT should go into the line inputs of channels 9-16. In this scenario, channels 1-8 are for recording, channels 9-16 for tape monitoring.
If you only need to record 1 or 2 tracks at a time connect the sub outs 1-8 to the 8 inputs on your ADAT and assign your channels to the appropriate subgroup. These outputs are double bussed, so whatever you send to sub1 goes to sub outs 1 & 5, sub 2 goes to sub outs 2 & 6, etc. Just arm the track you want to record since the same signal goes to 2 tracks on the ADAT. Patch the direct outputs from your ADAT to mono line inputs 3-11. (Note the handy silk screening on the channels, which corresponds to this setup.)<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[17314],"manufacturers":[33516],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n