0% Interest for 24 Months! Learn more »
(800) 222-4700
  • Español: (800) 222-4701
Microphone Month 4


Roland V-STUDIO 20 How To Turn On Phantom Power

Condenser microphones, unlike dynamic mics, require 48 volts to function — (referred to as “phantom power”). This is supplied by the V-STUDIO 20’s XLR connection to your microphone. Follow the steps below to turn on phantom power in the V-STUDIO 20.

Note: The V-STUDIO 20 Driver and VS-20 Editor Software must be installed in order to turn the phantom power on or off. If you have not installed this software, follow the instructions found in the “V-STUDIO 20 Software and Driver Installation” article found in the knowledge base.

1. Connect the V-STUDIO 20 to your computer via USB.

2. Launch the VS-20 Editor software on your computer.

3. Click on “Setup” on the top of the software window and then click on “Set Up MIDI Devices…”

4. In the Set Up MIDI Devices window, select “VS-20 Effect Control” for both the Input and Output dropdown menus and then click OK.

5. Click on the “SETTING” button towards the right of the software window. The System Settings window appears.

6. Click on the small red circle to the left of “+48 V” so it is lit. Phantom power is now on.

Click here for 28,000 answers to your tech questions

Hundreds of Deals in the DealZone