Follow along with this guide to set up your NanoKontrol 2 with Pro Tools.
- While holding down the scene and rewind buttons, turn on the NanoKontrol Studio to set it to Pro Tools mode. Once the NanoKontrol Studio has been set to Pro Tools mode, it will continue operating in that mode.
- In Pro Tools, open the “Peripherals” window, and then select HUI for Type.
- Select the NanoKontrol Studio ports for the sending and receiving ports to be used by HUI.
Note: The HUI protocol is not available for original (version 1) NanoKontrols.
Pro Tools Troubleshooting Guide
nanoKontrol setup in Pro Tools 6 and 7.
How to restore the factory settings on the Korg nanoKONTROL
NanoKontrol2 Setup in Cubase
NanoKontrol2 Setup in Sonar