rrrabuyvsvsveytfazersurdwarubawvev
0% Interest for 24 Months! Learn more »
(800) 222-4700
  • Español: (800) 222-4701
Cart
Dad Gift Card

SweetCare®

How do I update the firmware on my TC Electronic Ditto Looper?

Before you update your Ditto Looper, make sure your computer meets the following requirements:

PC
  • Win XP (SP2), Win Vista, Win 7 (32 and 64 bit), Win 8  (32 or 64 bit)DC Electronic Ditto Looper Pedal
Mac
  • OSX 10.6x or higher

NoteYou’ll also need a USB mini b cable.

To update the Ditto Looper on a PC:
  1. Download the Ditto Looper updater.
  2. Connect your Ditto Looper to your computer via the USB mini b cable.
  3. Set your Ditto Looper to boot mode by inserting the power cable while holding down the footswitch. The LED will turn green to indicate it is in boot mode and ready for the software update. Then, open the updater that you downloaded in step 1.
  4. In the Output Device drop-down menu, select Ditto Boot. (Note: on Win XP, it will be listed as USB audio device) After this, click the green update button to start the update.
  5. When the progress bar reaches 100%, the LED on the pedal will change. The Ditto will reboot automatically once the update is complete. Do not disconnect the USB cable while the update is in progress.
To update the Ditto Looper on a Mac:
  1. Download the Ditto Looper updater.
  2. Connect your Ditto Looper to your computer via the USB mini b cable.
  3. Set your Ditto Looper to boot mode by inserting the power cable while holding down the footswitch. The LED will turn green to indicate it is in boot mode and ready for the software update. Then, open the updater that you downloaded in step 1.
  4. Drag the DittoLooperSwUpdater application to your desktop and double click the icon to start the update.
  5. In the Output Device drop-down menu, select Ditto Boot and press the green update button to continue with the update.
  6. When the progress bar reaches 100%, the LED on the pedal will change. The Ditto will reboot automatically once the update is complete. Do not disconnect the USB cable while the update is in progress.

 

Helpful Links

Ditto Looper X2 FAQ

How do I update the firmware on my TC Electronic Ditto X2?

How do I update the firmware on my Pigtronix Infinity Looper?

How do I update my TC Electronic HarmonyControl Guitar to the latest software?

The loop that I imported from my Ditto Looper X2 doesn’t work in my DAW.

Click here for 28,000 answers to your tech questions

Popular Related Products