One Amp to Rule Them All?
The PRS Two Channel Custom 50W, 1 x 12" tube combo amplifier was designed to be a modern guitarist's Swiss Army knife of tone. Two channels pack more variety than you may expect, covering everything from expansive, chiming clean tones to tight, aggressive high-gain sounds. And despite its tonal versatility, the Two Channel Custom is quite easy to dial in fast. You get two footswitchable channels, a footswitchable solo boost, an effects loop (with send/return level controls), and a powerful set of tone-shaping controls. Sweetwater's got your desert island amplifier - the PRS Two Channel Custom combo.
PRS Two Channel Custom 50W, 1 x 12" Tube Combo Amplifier at a Glance:
- Professional features and high-class tone
- Flexible tone-shaping control
- A sweet-sounding, assignable reverb
The PRS Two Channel Custom is easy to integrate into virtually any guitar rig. You've got a switchable 4/8/16 ohm speaker output, so you can easily connect an extension speaker cabinet to push more air. And the effects loop has send/return level controls, making it simple to keep your signal level consistent throughout your effects chain. And just like every PRS amp, the Two Channel Custom has easy-access bias points on the back panel for easier tube maintenance.Flexible tone-shaping control
You've got a lot of playing to do before you've heard all that the Two Channel Custom has to offer. Two channels give you everything from extremely clean tones to raw, aggressive high-gain sounds. For a more modern sound, the Mid tone control on the lead channel can be pulled for mid-scooped tones, perfect for metal. A presence control lets you dial in as much intensity as you want, and pulling it engages the Depth circuit which adds low-frequency emphasis in the power amp stage. Long story short, if you've got a tone in your head, you can probably create it with the PRS Two Channel Custom.A sweet-sounding, assignable reverb
You get a rich-sounding reverb onboard the Two Channel Custom amplifier, and it's more flexible than you might expect. Give the reverb knob a pull and it assigns itself to just the clean channel - push it back in and it's on for both channels. So whether you like reverb on everything, or just on some of your parts, you've got what you need in the PRS Two Channel Custom.
PRS Two Channel Custom 50W, 1 x 12" Tube Combo Amplifier Features:
- Modern-sounding combo amplifier with features designed for the professional gigging guitarist
- Closed-back design enhances definition and tonal punch
- Master volume for each channel really lets you fine-tune your tonal combinations
- Amazingly responsive and dynamic, with no loss of high frequencies when you turn down your guitar's volume
- Footswitchable solo boost makes it easy to cut through the mix
- Rich-sounding reverb can be assigned to both channels or just the clean channel
- Lead channel has a push/pull mid-scoop control
- Pulling the presence knob engages low-frequency emphasis