New to patch bays? Have no idea what half-normal, normal, or thru mode are? There are diagrams on top of the Samson S-Patch Plus that help you learn as you go! Plus, it's simpler than setting up many patchbabys because it provides switches right on the front! Whatever level your experience, the S-Patch Plus will be a huge asset as your studio grows.
Excellent for patching in compressors, series 500 gear and many other front end gear. Very easy to figure out and route.
I had a DBX PB48 in my home studio. After several durability issues with it, and after a recommendation from a friend, I purchased the Samson. I'm not looking back either!
Although the cost of the DBX and the Samson are very close, there is no comparison in the quality between the two units. The Samson smokes the DBX hands down.
Everything on the Samson is much higher quality over the DBX.. I don't get any of the weird cross talk issues with the Samson that I did with the DBX. Granted is was barely audible on the DBX but it was there none the less. I don't hear that with the Samson.
This is the best 1/4" TRS Patchbay option at Sweetwater. The only way your going to get anything better is to go to a Switchcraft TT/DB25 style patchbay system. We have these at our main studio but to configure many pieces of outboard with quality DB25 snakes, be ready to invest several thousand dollars.
The Samson is really the best option especially in your home studio. These hold up well in the professional setting as well. The friend that recommended the Samson to me is a Live Sound Engineer and has five of these units. He has only had very minor problems with them over the years and never had one go totally down. hat's with heavy every day live use.
If that's not a great track record then I don't know what is. In other words you can't go wrong with them. I highly recommend this one!
Simple patchbay that works
I have a small project studio and wanted to use my compressor for tracking and also as an insert in my pro tools rig. For tracking I wanted to be able to record a compressed track along with an uncompressed track. This is because I'm still learning about compression and don't want to screw up any overdub tracks. It's worked out fine. The switches on the front make is super easy to go from normalled, half normalled to thru.
Learning about routing in patchbays can be a little daunting at first but has really paid off. The Samson S-Patch plus is able to do exactly what I need it to do.
This is an excellent piece of hardware, well made, functional and at a very good price. I looked everywhere for this and sure enough Sweetwater (as expected) had it in stock and ready to ship
Not too much to say about this except that it does what it's supposed to do, excellent build quality, solid.
best features for a 1/4 inch bay
I own a high end TT 96pt patchbay, but needed to patch up all my analog synths and drum machines, for quick access routing. I bought one.... and now I have 3 and have completely removed the 96pt TT bay.
The normal/halfnormal switches on the front face make this a genius piece of kit for the price. Build quality is solid as well.
Great patch bays
I think these Samson S-Patch Plus bays are great. I have two of them. The three-position switches on the front (T, HN, N) are solid and easy to manipulate. Maybe someday I'll read something that will convince me I need the equivalent Switchcraft patch bays, but until then these are perfect. When I eventually convert to TT patch bays, then I probably will use Switchcraft TTs, since they're pretty awesome. For solid, dependable TRS patch bays with switches under each channel on the front, these are perfect for me.
If you don't know how to solder or even if you do but just hate it immensely, this is a great alternative for a patchbay. Depending on your studio rack space can sometimes be at a premium so there are obvious advantages for the TT style bays, but I also hate soldering. I have quite a few of these now in my rack and they have worked out great. Setup is always easy, and the toggle switch for Normal/Half-Normal/Through on the front is quite handy.
The only reason I gave it 4 stars is beacause of the space they give you for labeling your patch points, Samson doesn't really provide you with information on how best to label it, and traditional p-touch type adhesive labels are too wide and will partially cover up the jacks. This was unfortunately a very poor design choice.
Simple and effective
I am using this as a patch bay with my Universal Audio Apollo 16 and i cant hear any quality loss what so ever. Very high quality and built lock a rock.
The best 1/4" patch bay
I have used Neutrik for a long time amongst others. This one is so solid and the sockets are very smooth. Highly highly recommended. Only downside is it's difficult to label. I just put blank rack panels above and below.
If you need a patch bay this is it!!! The fact that you can access the controls in the front panel is very appreciated in the workflow. The built is very sturdy and is esthetically beautiful. Of course, the costumer service at sweetwater was excellent as always.
I have it for couple of months, never had any issues with it. Solid build, and having normal/half normal/through selector on the front panel is a big big plus. Price is also great!
Great patch bay, great access to mode controls
Great patch bay with easy access to normalising modes, absolutely perfect for my small studio setup. I highly reccomend it
samson s-point plus patchbay
this samson patch bay is solid & doesn't have cheap jacks & switched just plug in 1 connector & you will be able to tell it's making tight connection ! i could actually hear a major difference from my other patch bay ! 3 yr. warranty as well ! i will be buying more !
Useful and versatil
This is a excellent patchbay, I have two of them and find it easy to connect my external compressors to any channel in my mix. I also use it as the intermediate point between my analog DAW outs to my summing mixer so I can connect gear (like bus compressors) before the signal being summed. I also like the flexibility of switching between Normal, Half-normal and Through Mode operation
S patch is a go
Great product and sales service! First buy from sweet water and will gladly give them my business again!
A Great Choice
I researched all the patchbays in this general price range, and I chose the Samson based on two things: 1) the switchable normalling, and 2) great reviews online. Why pull out modules when you can flip a switch on the front panel? So much easier. The plugs feel solid on this unit. I'm very happy with my purchase.
My only complaint, and this is pretty silly, but I would prefer black to the blue color. Whatevs.
Great patchbay for the price
I did not know what to expect buying a Samson product (I would normally NEVER buy any low end products like Samson, Behringer, etc), but this patchbay was a pleasant surprise. Works great, the switches on the front are a BIG help so I don't have to go behind the rack or completely remove the patchbay to change to half normal.
First off, I have to make this disclaimer -- As is the case with any extra paths added from the source to the destination, I will honestly say that I did an A/B comparison of:
A. My Preamp directly to the Line-in (on my interface) &
B. My Preamp & Line-In hooked up to the Patchbay THEN in.
The direct connection sounded a bit more dynamic and cleaner. The little crackles in my voice and small details came through cleaner.
I had to say that to begin with. This isn't a magic wiring solution. But that tiny loss of fidelity is the ONLY thing wrong with this (or any) patchbay. The Samson S-Patch is extremely versatile, attractive-looking, efficient, and well-constructed. If you have a limitation on inputs and want to do more with what you have, this is an absolute must.
Eventually, when my studio is optimized (with a more expansive interface), I will have more things routed directly -- Send and Return configurations directly through the interface, etc etc. But I will DEFINITELY still have this patchbay hooked up and have some Ins and Outs set aside for it. Reason being, this is one of the greatest ways to experiment with sound and set up creative new configurations.
If you have an old reverb unit lying around, a distortion pedal, a delay somewhere in your closet, a compressor you don't really use, etc. hook them all up to this patchbay and set yourself free from port-limitations! Wire this to that, to that, to that, and experience the closest thing to software plug-ins in the real world.
It's not a magic cable-routing solution, but it will preserve 98% of your signal's quality while allowing you to send anything anywhere.
I give it my seal of approval, this patchbay has a permanent place on my rack. :)
You get what you pay for
Works as advertised. Channels leak into each other very quietly. Ok if you don't care about that. Not ok for me.
Best Patch Bay for the $
Got one of these and was so impressed bough another, now getting 2 more and replacing all my old bays.
This thing is ideal for the home studio. It dosn't cost a fortune you don't have to to take it apart to change the cnfig. on it. The switches are on the front in stead of a different brands on the top so when you mount another peice of rack gear over it you can still shange it up as the switching is on the front Great Unit. Hell for that matter any studio.would be happy with quiet as Mouse or a patch bay should be!
Surprisingly High End!
I have seen many high end people recommending this gear. 48 TRS connecters in such a cool price make it winner for me. I m getting 2 more!
Great little patch bay for the money
Okay so I know you're probably thinking "Its a Samson, it can't be better than a DBX or Neutrik". I thought the same thing. I was recently setting up a studio for someone and they had both this and the Neutrik. I studied the two, test them out, and went with this one. Its a really solid patch bay and the convenience of the front panel switching is so awesome.
Great product, great price, great quality! Nuff Said!
This patch bay will become the pride of any studio arsenal of audio hardware. It's not often I get to use these adjectives with much of today's mass produced audio signal products, but the Samson S-Patch Plus will impress every time. From it's quality of build and evident attention to detail and functionality, to it's up-front swiching capabilities and the accurate detent positioning and jack insert positive feel and friction -these units rock -really. None better at this juncture. Impressive!!
This is a fantastic patchbay...couldn't ask for more!! The switches on the front make switching from fully normalled to half normalled fast and efficient. I'm actually about to purchase a few more of these very soon! Very satisfied with this unit!
Seriously this unit blows away many other patchbays on the market, great features with front panel switching and a good work horse for the studio! I bought 5 units!
Why go Back Ze Rack
nothing much to say. its a patchbay. BUT ITS SIMPLY AWESOME. i didn't go back my rack since i got 2 of these.
The best 48-point patchbay available!
I waited for several weeks for this unit to come back into stock because I wanted it specifically. The NORMAL/HALF NORMAL/THROUGH switch on the front of the unit makes this worth twice what they ask for it! So much easier if you have dynamic routing needs! Highly recommended!
Solid, Useful Piece of Kit
Just got this from Sweetwater and finished wiring everything in and run sum test signals
This is a solidly made patchbay that passes the signals without any added noise which is, of course what a patchbay should do!
What makes this standout for me is the switching between Normal, Half normal and Through for each pair on the front of the unit. Many other units necessitate pulling circuit boards and changing settings and then replacing.
This is a nice simple to use patchbay that you can drop into your rack and not have to worry about.