Behringer PSU-SB 9V DC Power Adapter Reviews
Need a power adapter for your effects pedals? You need the Behringer PSU-SB! It's a general-purpose DC 9V unit that's perfect for powering your stomp boxes. It delivers a generous 100 mA current, so it has enough beef even for your digital devices. And it rocks typically rugged Behringer build quality, so your know it'll last. Pick up your Behringer PSU-SB from Sweetwater today!
Highest Rated Reviews
Compact and works
This is a great power supply if like me, you are using a power conditioner and space can be a premium. Smaller than Boss and doesn't sit sideways like others, leaving you room to actually use all your power outlets. I Ave had it for a year now with no issues at all.
Needed it and works good
Needed it and works good
Works Perfectly
I've really enjoyed my Behringer UC-200 Chorus Pedal, but I found it very noisy - until I switched to battery power. Then it dawned on me that the had been using - one that had been laying around forever - was the problem. I got this one - the one made by Behringer for their effect pedal - and it is absolutely silent now when not playing. Now I can pack the battery away and not be concerned about it giving out on me right when I need it. Great price, great investment.
Behringer comes thru
I'm using 3 of these for my EVH 5150 Overdrive, MXR M300 Reverb and MXR delay pedal and no problems.
This thing is TINY
The photos do not do it justice, this thing is tiny compared to most wall warts.
Does the job fine, lights up my GFI Specular Tempus and everything seems good.
Great price and the build seems solid.
Great power adapter
This adapter works great with my Behringer digital reverb pedal. Only took a few days to get here too. Thanks Sweetwater for another great product.
Perfect Power Play
Really glad I got this power adapter for my Behringer pedals. Much better than having to replace batteries all the time, not to mention the environmental benefit.
Highly recommended!
Behringer PSU-SB DC 9V Power Adapter Review
I recently purchased the Behringer Powerplay P1 Personal In-ear Monitor Amplifier for use in a large loud rock band. This Behringer PSU-SB - General-purpose DC 9V Power Adapter allows me the option to power the amp with either a simple 9v battery or run it on house electricity. Very small and easy to connect. As a drummer I don't move around the stage too much so it's best for me to use the power adaptor. A no brainer.
Behringer General- Purpose 9V Adapter
For foot pedals that DO NOT require their own power supplies, this all purpose adapter will do the job. It's small in size and will power those stomp boxes requiring a standard 9v adapter.
General-Purpose DC 9V Power Adapter
The name says it all. It's a general-purpose DC 9V power adapter. If your pedal does not require a certain or special adapter, and you don't want to use an 18V adapter (if possible), then this DC 9V adapter will do the job (power your pedal). It's inexpensive and well worth the cost. I have several.
9v Power Adapter
What can I say. Plug it in and no more batteries.
So nice. This puppy does the job.
I bought a 9 volt ac adapter from Walmart. Bad Idea. It was defective. So I googled universal 9 volt adapter and found this Behringer replacement adapter.
I own TC Electronics Flashback Delay w looper and Tone print. I. had the hardest time finding an adapter made by TC Electronics.
This is a perfect replacement for TC Electronics Flashback Delay.
It works.
Must Have
Always a smart move to get a power supply with any pedal purchase!
PSU-SB -9 V
Good constant power supply and a good bargain.
Behringer PSU-SB 9Volt adapter
Works as it should and a great price. Thansk
Exactly the PSU you need
It's exactly what you need if you want to power guitar pedals.
It's ok
but it seems to have a lot of compression built -in too.
This adapter can only power one effect pedal at a time.
This is a perfectly fine, super compact adapter for the purposes of powering something like a single keyboard or a single effect pedal, but unlike Behringer's "Power the World" adapter that was out of stock when I tried this one, this unit cannot power more than one guitar pedal at a time. Not even two! So if you need something to power more than one pedal, don't make the mistake I did, which was thinking this must be the same unit without the jumper cables–turns out, it's not.