Clamp Itself is Terrible, Rest is Great
I love my P16-I and P16-M. Gave them both top marks. But this mounting bracket is terrible. Well, to be fair, the part that you attach to the P16-M works great, and you can attach that directly to the top of a mic stand, which provides a nice, stable platform. However, if you want to attach it to a vertical mic stand tube, the clamp I received was defective, and from other reviews of this bracket, it looks like that's common. The specific issue is that the bracket is not formed correctly because it isn't quite bent far enough. Consequently, the screw mechanism doesn't point directly at the "V" that contacts the far side of the mic stand tube. So, the screw ends up pushing a bit to the side of the mic stand tube instead of on its center. That lets the P16-M itself to droop to one side and threaten to fall off entirely. Fortunately, I happened to have an old K&M iPad holder for an old iPad that I don't even have anymore. It comes with a nice, beefy clamp to hold the iPad to a mic stand tube. The iPad bracket attaches to that beefy clamp using the same fastening mechanism used by the part of this P16-MB mounting bracket to attach to the P16-MB flimsy clamp. So, I was able to replace the flimsy, defective clamp that came with the P16-MB mounting bracket with the beefy clamp from the old K&M iPad holder. Now, the whole thing is rock solid. So, sure, go ahead and buy this bracket so that you have the part that attaches to the P16-M. However, be prepared to buy a beefier mounting bracket of some sort to replace the one that comes with this P16-MB mounting bracket, if yours turns out to be defective, too.