This mixmap for Cubase users is for contolling and selecting effects.
Thanks to whoever posted the control numbers to the list.

Two major parameters were not listed, i.e. the Reverb left and right 
levels (as seen in multi configurations). I found these by trial and 
error and the reason they weren't listed became apparent.
The Reverb Right Level is controlled by controller #64 which is also
sustain pedal!! The only way to use it is to edit all layers of the 
program assigned to Ch 16 (turn Sos Pedal OFF on LAYER page). Obviously this
inhibits its use somewhat so it is best left alone. I have put a "CAUTION"
text object over it to remind you.

To use this mixmap, set the K2000 up as follows:

1)On the EFFECTS page set to MASTER, Chnl 16
2)On the MIDI RECV page for CH 16 set PrgChng Lock to ON.
3)Also on MIDI RECV set ProgChgType to Extended.

With v1.0 to v2.? you must do this every time you power up *or* you can 
set it up and save MASTER (without dependant objects), then load that 
file each time you start.

You will see that I have not included all the parameters that can be 
controlled. I have only done those which I think would be usefully 
changed to give impact to a sequence, so things like Reverb HFDamp are 
not included. You can always create more objects if you really want
more parameters represented. I have not done objects for PARAMETRIC EQ
4TAP DELAY or GRAPHIC EQ but the bypass and wet/dry mix controls will work 
for them too.

None of the preset effects use the Room Simulation algorithm. You will 
need to create and save such an effect to use the controls for Room 
Simulation. I included them because I use that algorithm sometimes.

For best s/n set dry levels to 0. In some preset effects it is not 0.

This is a far more elegant way of controlling fx than my previous K2000 
fxmap uploads (which included fxprogs.krz). Those older files should be 
deleted from any archives.

Glenn Reither 
glenn@loose.apana.org.au