0% Interest for 24 Months! Learn more »
(800) 222-4700
  • Español: (800) 222-4701
Cart
January Clearance 2017

Sweetwater Forums [Archived]

After 15 years of great discussions, the Sweetwater Forums are now closed and preserved as a "read-only" resource. For discussions about current gear, check us out on Facebook, YouTube, inSync, and our Knowledge Base.

K2500r Scsi

tmosier

I have recently bought a K2500R and am installing a scsi drive on it. I've checked all the specs and they fit, the only problem I have is un-terminating the K2500.
My model does not have the switch on the back, nor does it have the three terminating resistor packs. I took a look on the SCSI IN port after taking out the SIMMs and the digital in/outs and there is a jumper that was enabled. I suspect that it toggles the termination. Is that correct?
I know I'm supposed to take it to an authorized dealer, but if there were any documentation on the subject I could easily do it myself.
todd
July 27, 2001 @03:44pm
Kurzrep

You are correct. You found the jumper which when removed, disables SCSI termination.
August 17, 2001 @07:22pm