|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
| WORKINGPRO 2 X 10 DESCRIPTION |
|
Try Two Tens for Tight Bass Tones! There's something about a 2 x 10" speaker cabinet that evokes out the heritage of bass guitars. And that's what you get with the SWR WorkingPro 2 x 10! Full-range response and 200 watts of power handling combine to give you all the thumping lows, crisp highs and sweet-spot midrange to get the job done. The WorkingPro 2 x 10 small-cab configuration fits in any size vehicle, and won't hurt your back or your bank account. SWR WorkingPro 2 x 10 Bass Cabinet at a Glance:
Great main or extension cabinet The WorkingPro 2 x 10 delivers famous SWR bass sound in a compact speaker cabinet that's ideal for small to mid-size gigs. The WorkingPro provides a different, deeper sound, yet still retains the trademark SWR quick response and full-range clarity. At 17" high and 23" wide, the WorkingPro 2 x 10 passes the "hatchback test" with flying colors. Plus, its 55-lb. weight is easily handled by the built-in casters that make moving the WorkingPro 2 x 10 a tilt-and-roll operation. Custom-designed 10" drivers and piezo tweeter With 200 watts of power handling at 8 ohms, the WorkingPro 2 x 10 can punch through loud drummers to deliver round bass tones, even at a distance. The custom-designed 10" low frequency drivers are optimized for maximum bass output, especially when loaded into the specially-tuned enclosure with a front slot port that focuses bass response. And the Le-Son TLX-1 piezo tweeter adds support in the mids and high mids. Choose your preferred tone with the variable tweeter attenuator The WorkingPro 2 x 10 gives you the flexibility to dial in or out the amount of high-end "slap" with its variable tweeter attenuator. A normal setting for this control is straight up (twelve o'clock). Turn the dial fully counterclockwise to remove the tweeter from the circuit. Turn the dial clockwise to increase the high frequency content. An internal (passive) crossover divides the signal, sending frequencies above 5kHz to the tweeter and those below 5kHz to the driver. Sharp new looks with sturdy steel grill The WorkingPro 2 x 10 is equipped with dual Speakon and 1/4" input and output jacks. It's sharper than ever in classic SWR black-and-chrome styling. Spring-loaded rubber-grip side handles make carrying easy, and the chrome-powdercoat stamped-steel grill is vibration-free. The WorkingPro 2 x 10 is ideal for small-to-medium size gigs as a standalone cab, or in combination with a 4x10" or 1x15" for an incredible deal on a two-cab rig! Perfect cab for SWR 350x or WorkingPro 400 amp The SWR WorkingPro 2 x 10 sounds great with any bass amp but it really shines when connected to the SWR 350x or WorkingPro 400 head. SWR WorkingPro 2 x 10 Bass Cabinet Features:
Get classic bass tone with an SWR WorkingPro 2 x 10!
|
|||||||||
