Samson TXM20 (No Longer Available)
20-ch, 2 x 500W Powered Mixer with 12 Mic Pres and 24-bit Effects Processing
Sorry, the Samson TXM20 is no longer available. We've left this page up for reference only. Check out the great alternatives on this page or call toll-free (800) 222-4700 to speak with a Sweetwater Sales Engineer about similar products.
From Our Research Team:
A great live mixer from Samson!The TXM20 is a 20 channel powered mixer, with selectable power amp mode settings for 500 watts of power per channel, or 1000 watts in bridged mono. It features 12 high-quality microphone preamps with phantom power, channel inserts, and low cut flters. The TMX20 offers 1/4-inch phone and Speakon outputs, 3-band EQ pre channel, 4 Aux sends, and dual internal 24 bit effects processor with 100 preset programs. There is 1 stereo 9-band graphic EQ for the mains plus 1 mono 9-band graphic EQ for the monitors, and a mono sub output with variable lowpass filter. Equally suited for gigging musicians or in fixed installations, the TMX20 is a great all-around live mixer.
Samson TXM20 at a Glance:
20 channels of flexibility
The TXM20 is a twenty channel, powered mixer in an ergonomically correct, attractively appointed, tabletop enclosure. The TXM20 features a massive 1000-watt power amplifier, which is capable of running in 2 x 500-watt stereo, 500-watt Main plus 500-watt monitor, or 1000-watt bridge mono operating modes. To set the overall tonal response of your mix, the TXM20 features a 9-band Stereo Graphic Equalizer for the Main Left and Right outputs, plus a separate 9-band Graphic Equalizer for your monitor mix.
Connecting all your microphones and instruments is simple, with twelve mic/line inputs plus four additional stereo channels. There are also dedicated stereo effects returns for the onboard digital effects. And the effects! You can add one of the TXM20's 100 dazzling digital studio quality effects, which include Delays, Chorus, Flanging, and of course, lush Reverbs to your vocals or instruments using the onboard 24-bit Multi-Effects Processor. It's easy to dial up your favorite effects preset with the large seven-segment LED display. Need more effects? The TXM20 employs two onboard 24-bit Multi-Effects Processors. Plus, the TXM20 has extensive auxiliary busses allowing you to have complex combinations of effects on all the channels, or two different effects on different groups of channels. The auxiliary buses are also extremely flexible when it comes to monitor mixes.
The TXM20 will give you clean, clear sound reproduction thanks to the high quality, low noise microphone preamps, super clean, low impedance mix bus, two on-board 9-band graphic equalizers and the high output/ low distortion power amplifier. The units are easy to transport with their compact size and oversized, sure-grip handle. The super-tough steel construction ensures reliable, high quality sound from venue-to-venue and performance-to-performance day in, and night out. Optimized for live sound reinforcement and commercial installations, the TXM20 is an ideal mixer and power amp solution that offer plenty of inputs, sweet sounding effects and big sound in a compact package.
Samson TXM20 Features:
Affordable flexibility and power from Samson with the TXM20!
Can We Help?Sweetwater's friendly and knowledgeable Sales Engineers are regarded as the most experienced and educated professionals in the music industry, with extensive music backgrounds and intense training on the latest products and technologies. As your personal contact here at Sweetwater, they are available to provide personalized advice any time you need it.
Call toll-free (800) 222-4700 or E-mail us
Be the first to review this product
by Kevin M from Marshfield, WIBought the board to be the versatile plug-in we needed for for church band(s), DJ duties. So many ways you can use the power. Easy to get up and running. Solid feel to all the controls. Fit and fi... read more [+]nish are over the top. This much power comes with a little girth, wimps need not apply. close [-]
February 3, 2012
Music Background: weekend DJ, church sound-guy
Samson TXM20 Powered Mixer
by Jim Burgard from United StatesI ended up ordering this mixer after trying two different Mackie PPM608s. The Mackies were very disappointing in that when I used them to perform out, I had constant problems with the built-in limite... read more [+]r cutting out the sound whenever I got on the mic or had any kind of a hard "P" sound in the lyrics - the mains would cut out horribly. After getting a second unit and finding it to be WORSE than the original, I gave up on Mackie and decided to get the Samson TXM16. Unfortunately they weren't in stock, but the TXM20 was, and since I needed it ASAP to play out, I went for it. I had good luck with an older Samson powered mixer that I still have for a practice room, and figured I'd give them a try in a bigger unit. I have NOT been disappointed. I used this unit to play out last Friday night and it performed awesome! Got lots of compliments on how clear the vocals and my acoustic guitar were coming through. The board is laid out in a very easy to read and understand manner, and I had no problems making adjustments on the fly. The only thing that I think could be a little better are the on-board effects, but they are OK. My sales engineer (Jon Gillespie) and Sweetwater were awesome to work through these difficulties with, and had this new board in my hands in a very professional and timely manner. I ordered a Lok-Tight Pro Double-X stand to place this on, and it is rock-solid. close [-]
January 17, 2011
Music Background: Amateur musician, currently playing in a duo.
I love this mixer!
by Phil Gould from Central IowaI'm using this mixer mainly to provide sound for a female vocal quintet and their keyboard accompanist. When matched with Samson's Resound RS12 series of mains and monitors, it makes one great soundin... read more [+]g system. I frequently get compliments from audience members about how good it sounds, and the gals love how well the monitors work for them. I also like that this mixer provides both 1/4" and Speakon output connectors.
November 8, 2010
Music Background: gigging musician & live sound tech, with a humble home studio.
I appreciate the main insert jacks too, since I like to utilize an outboard compressor. I use the input signal LEDs to balance the vocal mics. My only criticism is with those LEDs. I have to almost max out the input gain to get a usable visual indication indoors. Outdoors, in bright sunlight, the LEDs are almost useless. close [-]
Cecil, Mesquite, TX
Buy Today, MakeSweetwater's Flexible Payment Plan is a convenient, interest-free way to buy gear now and stretch your purchase across three budget-friendly payments. Simply choose the "3 Easy Payments" option in your cart, and we'll divide your purchase amount into three convenient payments, billed to your current MasterCard, Visa, Discover, or American Express card. There is a $10 processing fee for using this service, and your billing address must be in the United States to be eligible. It's just another way we make shopping at Sweetwater easy and convenient!
Get your Samson TXM20 now and spread out the payments!
This program is subject to credit approval. We will pull a copy of your credit report to approve your application.