Click to enlarge Free Shipping

• 
• 
• 
• 
• 

View all 8 images »

From Our Research Team:

Club V - The Evolution Of Sound Reinforcement!

Gigging bands, mobile DJs and houses of worship have helped make the first four generations of Yamaha Club Series Speakers incredibly popular. The refinements of generation V continue this success story: larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual Speakon and 1/4" connectors.

Cabinet Construction
These cabinets are constructed of high quality particleboard, chosen for its high strength and elasticity, consistent void free makeup and light weight. Another great benefit of this material is its environmental friendliness. Made from southern yellow pine, this material is both abundant and quickly renewable. Accurate CNC routing machines are used to cut every part, assuring consistency with tolerances of one ten thousandth of an inch. Skilled technicians assemble each cabinet by hand, rejecting any defects. Whether covered in durable carpet or the elastomeric spray coating, heavy steel handles and sturdy pole sockets make moving and positioning easy.

World-Class Drivers
The drivers, or speakers in these cabinets, are custom made by Eminence Speaker Corporation to Yamaha's exacting tolerances. Woofers share design features like high strength curvilinear cones and Dupont Kapton voice coil formers. Oxygen-free copper voice coils and oversize strontium ferrite magnets are also used to provide high power handling and long life. The 15" and 18" drivers use cast aluminum frames to support the massive magnet structure eliminate flex and help dissipate heat. The compression driver that generates the high frequency sound uses a pure titanium diaphragm. This 2" dome is one of the largest in its class, allowing for very high output and low distortion, without the aid of cooling fluids. It's mated to a 90 degrees x 40 degrees custom designed CD (constant directivity) horn with excellent dispersion and response.

Crossovers
Crossover networks that divide the signal going to the woofer and compression driver are constructed with oversized coils, high voltage capacitors, and power resistors designed to provide the best possible sound quality and minimize loss. Overload protection is also included to protect the components.


Features:

• 10" floor monitor
  
• 1" titanium dome compression driver
  
• 90 x 90 degree dispersion
  
• Great where size is a concern

Specification Detail Powered No Power Configuration Not powered LF Driver Size 10" HF Driver Size 1" Power Amp Not powered Power Rating (Program) 250W Peak Power Capacity 500W Impedance 8 Ohm Frequency Range 70Hz-20khz Crossover Frequency 1.8kHz Maximum Peak SPL 117dB Continuous Horizontal Coverage Angle 40 Degrees Vertical Coverage Angle 60 Degrees Enclosure Material MDF Mounting Options Pole, Floor Wedge Inputs 2 x 1/4", 2 x speakon, in parallel Outputs 2 x 1/4", 2 x speakon, in parallel Height 13.9" Width 22" Depth 10.9" Weight 29.5" lbs. Manufacturer Part Number WC25580

More Recommended Accessories