Click to enlarge

From Our Research Team:

Clean Power Equals Clean Sound

Furman Sound introduces the all new Power Factor PRO, redefining power conditioning for the guitarist, bassist, or keyboard player. Today’s AC power is contaminated. Whether you play in a stadium, bar, or rehearsal space, they all have one thing in common, the AC power is supplied from your local utility. What’s worse is that the “power factor” supplied from your building’s AC outlet is typically poor, thanks to increasingly overtaxed power lines and raised line impedance. In fact, the quality of AC power has been so poor for so long, most musicians have no idea how great their amplifiers could really sound. When the AC power factor is poor, amplifiers sound muddy because their power supplies can’t deliver when pushed. The scream and cry from a guitar loses bite and harmonics, basses lose their punch and weight, keyboards sound nasal, losing clarity, attack, and extension. Not so with Furman’s Power Factor PRO...


Furman Power Factor PRO at a Glance:

• Clear Tone Technology actually lowers the AC line impedance
  
• Lowers AC line noise to unprecedented levels in the critical audio frequency band.
  
• Series Mode PROtection guards your equipment from voltage spikes.
  
• 12 amp R.M.S. Capacity, 20 segment AC voltmeter.

Clear Tone Technology
The Power Factor PRO’s “Clear Tone Technology” actually lowers the AC line impedance supplied by your wall outlet, while storing energy for peak current demands. In fact, there are over 45 Amps of instantaneous current reserve in the Power Factor PRO. Additionally, “Linear Filtering Technology” dramatically lowers AC line noise to unprecedented levels in the critical audio frequency band. What does this mean? Just plug in your current starved amplifier, crank up the volume, and listen to the dynamics, harmonics, and clarity you’ve been missing!

Series Mode PROtection
Additionally, the Power Factor PRO is the most comprehensive power conditioner ever created for the serious musician. Maintenance free - Series Mode PROtection guards your equipment from voltage spikes that can damage your clamps at 188 Vpk, 133 VAC RMS even when tested with multiple 6000 VAC - 3000 Amp surges! Our pro level over-voltage auto shutdown circuit assures you will never see your prized amplifier go up in flames due to a sustained voltage overload.

12 amp R.M.S. Capacity
The Power Factor PRO has a generous 12 amp R.M.S. capacity, a convenient 20 segment AC voltmeter, a detachable, locking AC cord, and (4) AC outlets, all contained in a small convenient, floor standing package.

Options
Power Factor PRO E: “E” suffix versions are for use in countries with 220/240 volt AC lines. It features the internationally accepted IEC-320 connectors. The voltmeter on the Power Factor PRO E reads from 180 to 256 VAC, in 4 volt increments.


Furman Power Factor PRO Features:

• Clear Tone Technology provides Power Factor correction with 45 amps peak current reservoir.
  
• SMP (Series Mode PROtection) with extreme voltage shutdown.
  
• LiFT (Linear Filtering Technology) with zero ground contamination.
  
• Four rear panel outlets.
  
• 12 amp rating, with circuit breaker.
  
• Three year limited warranty.
  
• Front panel meter to display incoming line voltage ranging from 90 to 128 volts.

Specification Detail Manufacturer Part Number PF PRO