Click to enlarge Free Shipping

• 
• 
• 
• 
• 

View all 12 images »

Put This Unobtrusive and Effective Boom Mic on Your Ensemble!

The MicroBoom MB8450HC mic/boom system pairs the fantastic, long-reach Audix 84" MicroBoom arm with their high-quality M1250B-HC mini hypercardioid condenser mic; it's an outstanding all-in-one package for overhead stage miking of orchestras and choirs, ambient room miking, drum-miking, and more. The boom in the MicroBoom MB8450HC package can be used in either a horizontal or a vertical position, while the upper end of the boom holds a mini-XLR connector to securely hold the mic in place. The mic has a built-in low noise preamplifier so no bulky external supply is needed. If you want a clean, professional, and elegant miking solution, you'll find it with the Audix MicroBoom MB8450HC!

Audix MicroBoom MB8450HC Hypercardioid Condenser Mic/Boom System at a Glance:

• M1250B-HC Mini Hypercardioid Condenser Mic
  
• MicroBoom-84 Boom Arm

M1250B-HC Mini Hypercardioid Condenser Mic
The Audix M1250B-HC delivers superb sound, and its hypercardiod pickup pattern offers excellent rejection of outside sound sources. It has a fully integrated preamp and detachable cable, as well as strong shielding from interference. the M1250B-HC makes a great overhead mic for choir and group vocals, on acoustic instruments, for symphonic area miking, speech presentations, cymbals, and more.

MicroBoom-84 Arm
Audix designed the MB8450HC system with ease of use, and its advanced boom design is also visually unobtrusive. The high-performance, long-reaching MicroBoom-84 arm combines with the M1250B-HC condenser microphone to provide very clean and effective overhead miking. This 84" carbon fiber boom attaches to any microphone stand, and it weighs in at only 4 ounces. Carbon fiber is one of the most lightweight and durable materials on the planet — which is why it's being used to make parts for race bikes, aerospace crafts, motorcycles, and more. The MicroBoom is certainly discrete, but it's also rugged. It has a mini-XLR connector to securely hold the microphone in place, while high-quality Mogami cable is used internally to deliver excellent sound to the bottom of the boom, where a mini-XLR male connector awaits.

Audix MicroBoom MB8450HC Hypercardioid Condenser Mic/Boom System Features:
MicroBoom Stand

• Diameter: 0.2" (7.4mm)
  
• 4 ounces
  
• Made of lightweight, rigid carbon fiber

M1250B-HC Hypercardioid Condenser Microphone:

• Transducer Type: Condenser
  
• Frequency Response: 50 Hz-18kHz
  
• Polar Pattern: Hypercardioid
  
• Output Impedance: 150 ohms
  
• Recommended Load Impedance: > 1000 ohms
  
• Signal/Noise Ratio (A-weighted): 73dB
  
• Equivalent Noise Level (A-weighted): 21dB
  
• Maximum SPL @ .5% THD: 140dB
  
• Dynamic Range: 119dB
  
• Power Requirements: 18-52V
  
• Connector: 3 pin mini-XLRm
  
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
  
• Housing/finish: Brass/paint
  
• Weight: .7 oz/20 grams
  
• Length: 2.1"/54mm

The Audix MicroBoom MB8450HC gives you an easy-to-use, all-in-one discreet overhead miking solution!

Specification Detail Microphone Type Condenser Polar Pattern Hypercardioid Diaphragm Size .47" (12mm) Frequency Response 50Hz-19kHz Max SPL 140dB SPL Output Impedance 150 ohms Signal to Noise Ratio 73dB (A weighted) Self Noise 21dB (A weighted) Low Cut Filter No Filter Pads No Pad Connector XLR Weight .04 lb. Manufacturer Part Number MB8450-HC

Recommended Accessories