Click to enlarge

From Our Research Team:

Big Marshall tone!

Marshall personifies rock n' roll like no other, and the JVM410H/1960B Package lets you tap into the mystique and power of the legendary Marshall sound - and save some money while you do it. The JVM410H all-tube 100-watt amplifier head brings you the full range of Marshall tone, from pristine to fire-breathing, and the 1960B straight cab features 4 G12T-75 speakers, and is the perfect companion. The JVM410H/1960B Package is great for any rocker looking for a vast array of tones.





Marshall JVM410H/1960B Package at a Glance:

• Channel switching and more
  
• Marshall heritage
  
• From glassy to a roar
  
• Clear and True

Channel switching and more
The JVM series amps don't simply give you footswitchable channels. You get an entire palette brimming with different degrees of distortion, tonality, and effects. The included 6-way switch has easy-to-read LEDs, making this rig ready for stage use. It's also programmable, so you can set up different combinations of channel, mode, reverb level, effects level, and master volume easily. The Parallel/Series effects loops are also switchable on/off. Marshall made sure you'll get the most out of this amp even when your at the front of the stage!

Marshall heritage
Every JVM4 is made at the Marshall factory in the tonal heart of England. Time-tested, traditional methods of craftsmanship and construction are combined with the latest advances in modern manufacturing technology, ensuring world class build quality and roadworthiness. Internally, the JVM4 circuitry and layout has been kept to a minimum, ensuring the integrity of the guitar tone and an incredibly low noise floor - this coupled with meticulous valve selection and high tolerance, quality components adds to the all-important reliability factor that is synonymous with the Marshall legend.

From glassy to a roar
Two completely independent channels sounds fine, but this amp gives you so much more than that! Each channel features three footswitchable modes: Green, Orange, and Red. These modes give you different voicings and levels of overdrive ranging from pristine clean to super-saturated, harmonic-drenched, sustain-for-days distorted. Of course, the beauty of this configuration is that you can easily dial in these tones and everything in-between, and access them with the touch of a footswitch.

Clear and True
The 1960B produces a loud, well-focused and uncluttered sound with a tight, full low end and a crisp, clear top. It projects well across the guitar's entire tonal range and its clarity makes it ideal for players who like using a fair amount of effects such as reverb, chorus or delay as it doesn't "mask" or "muddy-up" such FX. Its all-around versatility and relatively "uncolored" nature makes this one of Marshall's best selling cab. It represents the sound of the guitar and head most accurately.

The Marshall 1960 cabinets are the best selling amp cabinets in the world and are standard on stages everywhere for their sound and rugged construction. While not complicated electronically, the effects of their materials, construction and speakers make the 1960s the choice of players everywhere and have made them the industry standard to this day.

Marshall JVM410H 100-watt Tube Amplifier Head Features:

• 100W tube amp head
  
• 5 x ECC83 (12AX7s) and 4 x EL34s
  
• 4 independent channels
  
• Each channel boasts 3 modes
  
• Studio quality digital reverb
  
• 2 footswitchable master volumes
  
• 2 FX loops Series/Parallel
  
• Emulated line out
  
• 6-way footswitch with memory
  
• Channel switching via MIDI
  
• Made in England

Marshall 1960B Features:

• 300W 4x12 straight 4/16ohms, mono- 8ohms stereo.
  
• 4 x 75 Watt 'G12T-75' speakers (1960A/B).
  
• Black grille cloth / white piping
  
• Large white logo
  
• Black elephant grain vinyl

The Marshall JVM410H/1960B Package gives you incredible sonic control and earthshaking Marshall tone!

Specification Detail Type Tube Number of Channels 4 Power 100W Effects No Effects Reverb Yes EQ Treble/Middle/Bass per channel Amp Modeling No Number of Models 0 Number of Tubes 9 Preamp Tubes 4 x ECC83 Power Tubes 1 x ECC83, 4 x EL34 Inputs 1 x Instrument Outputs 5 x TS speaker outputs, 1 x XLR speaker emulated output Footswitch I/O Yes Effects Loop Yes Height 12.2" Width 29.53" Depth 8.46" Weight 48.5 lbs. Notes MIDI In, Out

More Recommended Accessories