Free Shipping with no minimum purchase. Learn more »

Cart (800) 222-4700 Español (800) 222-4701

Guitars > Guitar Pedals & Effects > Pedal & Effects Accessories > George Ls Effects Cable Kit (Black/Nkl)

George Ls Effects Cable Kit (Black/Nkl)

Item ID: GLFXKit

Solderless Cable Kit for Creating Custom Cable Lengths for a Pedal Board or Rackmount Gear - Black

2 models to choose from:
 

Yes, It's In Stock!

This item is available for immediate delivery. Our centrally-located warehouse ensures you the fastest delivery time in the industry. Order now by adding to your cart or call your Sales Engineer.

Get more value at Sweetwater

or make 3 easy payments

From Our Research Team:

Hook Up Your Pedals with George L's Cable Kit

Pedals are cool. We all love pedals, but we hate losing tone. George L's Effects Cable Kit give you high-end cable and solderless plugs to create the perfect pedalboard. You can lose tone and signal with each cable length, not to mention pedals, but thanks to George L's you can create the perfect cable setup for your pedalboard. The shorter the cable run the better, this cable kit provides 10' of cable and 10 solderless connectors so you can create the exact length of cable you need to keep signal runs short and your pedalboard clean. Eric Johnson uses George L's cables on his pedalboard, why shouldn't you?

George L's Cable Kit at a Glance:
  • Quality sound
  • Low capacitance cable
  • Solderless plugs


Quality sound
One of the most over-looked ways to increase your sound quality is with better cables. Remember your signal chain is only as good as the weakest link. George L's Guitar Cables use high-end cables and connectors to create the best signal possible. George L's cables will even help reduce unwanted hum and noise in your signal chain. Wire up your pedalboard with the George L's Effects Cable Kit and notice the difference in your sound today!

Low capacitance cable
George L's uses low capacitance co-ax cable, this gives them as clear and uncolored a sound as possible. The higher the capacitance of a cable the more it gives you a muddy sound by killing your highs. We've all plugged into cable that have sounded muddy and nasty, George L's guitar cable ensure that you won't have that problem again. Keep the signal chain as short and as clean as possible with the George L's Effects Cable Kit.

Solderless plugs
No mess, no fuss, George L's Effects Cable Kit is fast and easy to use. You'll love the solderless plugs when creating your cables. Just slip the cable into the plug, screw down the end cap, and you're done! Yep, it is that easy. No more soldering iron, flux, nasty smelling smoke, or burning yourself. This kit is so easy to use you can do it at the gig. Great sounding and easy to build cables are what makes the George L's Effects Cable Kit a must have!

George L's Cable Kit Features:
  • Low capacitance co-ax cable
  • Ten feet of cable
  • 10 solderless plugs
  • Black cable with nickel-plated plugs
  • High-end plugs with lifetime warranty

Add a boost of tone to your rig with George L's Cable Kit.

Effects Cable Kit (Black/Nkl) Image Gallery

Specification Detail
Balanced No
Connector 1 TS Male right angle 1/4
Connector 2 TS Male right angle 1/4
Length 10'
Manufacturer Part Number .155 FX Kit Blk/Nickel

Can We Help?

call toll-free (800) 222-4700 or E-mail us
to get personalized advice from a Sweetwater Sales Engineer.

Additional Online Resources:

Reviews

based on 2 reviews

Great invention, but be smart during setup

by Liz from New York, NY
March 4, 2012
Music Background: Hobbyist
The idea behind this kit is that you arrange your pedals (on your pedalboard) in any order you want. You then get to custom-size your cable connections to allow for the proper pedal order/cable connec... read more [+]tions. So go ahead and put your wah on one end and distortion on the other; you just simply run a longer piece of wire to connect them where you want in your signal chain.

The only reason I'm not giving 5 stars is because they don't include tips or real instructions of any kind. Do yourself a favor and save yourself the headache:

1. Once you're satisfied with your pedal placement, it's time to cut cables. I like to loop mine underneath or side-by-side, short and out of the way.

2. You stick open end of the cable into the jack and press firmly in (use just your hands), bend at a 90 degree angle, screw on the screwcap. You can then put on your little rubber George L cap.

3. Eyeball or measure the other end of that wire until the next pedal connection. Use a straight, sharp razor to cleanly cut. I used a sharp wire cutter and still lost signal. Carefully used a razor and was fine. After cutting, follow step 2 again.

4. Once you have your first connection, hook it up through your guitar and amp to make sure you're getting a signal. It crossed my mind to do this, wish I had!

5. Repeat step 4 as you add pedals to avoid missing the one little cable that wasn't cut right or isn't connected properly. About a third of my cables weren't done right.

This all might be common knowledge for some of you out there, but I thought it best to give my thoughts. The George L web site doesn't have an instructions/FAQ up just yet, and sometimes you're just not near Youtube to get that info when you're ready to work.

Definitely get this kit! I'm impressed with how nice and quiet the cables are. Very pleased. close [-]

Good Product

by Randy from Holland, MI
March 5, 2012
Music Background: Hobbyist....
Works as advertised, however, I would recommend that you have a cable tester handy to ensure that you've connected them correctly. I had three of the five cables I made not work initially as I did no... read more [+]t push the cable in deep enough into the plug. The instructions say not to push the cable in too hard, however, I found this not to be the case. Still, a great product.... close [-]

Also popular

See Also: Guitar Cords , George Ls , George Ls Pedal & Effects Accessories , George Ls Guitar Cables

George Ls Effects Cable Kit (Black/Nkl)

Today's Payment: $39.99
Includes $10 processing fee
Payment 2: $29.99
In approx. 30 days
Payment 3: $29.99
In approx. 60 days

Buy Today, Make

Sweetwater's Flexible Payment Plan is a convenient, interest-free way to buy gear now and stretch your purchase across three budget-friendly payments. Simply choose the "3 Easy Payments" option in your cart, and we'll divide your purchase amount into three convenient payments, billed to your current MasterCard, Visa, Discover, or American Express card. There is a $10 processing fee for using this service, and your billing address must be in the United States to be eligible. It's just another way we make shopping at Sweetwater easy and convenient!

Get your George Ls Effects Cable Kit (Black/Nkl) now and spread out the payments!

Our Customers Say...

My Sales Engineer has always been really knowledgeable; he's right there with all the information I need. I've been very happy dealing with Sweetwater in general - there haven't been any negatives.
Ted Kynard, Charlotte, NC

Sweetwater Sound Inc.
5501 U.S. Hwy 30 W
Fort Wayne, IN 46818
Get Directions »

Toll Free (800) 222–4700
Español (800) 222–4701
Local (260) 432–8176
Fax (260) 432–1758
E-mail us

Phone & Retail Store Hours:
9–9 Monday–Thursday
9–8 Friday
9–7 Saturday
(All hours listed are
Eastern Standard Time.)

© 2012 Sweetwater Sound Inc. All rights reserved. Please read our Terms of Use and Privacy Policy. Links | Press Releases