| |
Best Solution for Poor Power Regions and Longer Runtimes
Going back and starting over is frustrating when you're just word-processing, but in music production, trying to reclaim a creative moment of inspiration can be near impossible. Nothing in the world of DAW-based music production is more devastating to the creative process than losing your work due to a power outage. The APC BR900 is the best solution to this nightmarish problem. It's also particular frustrating if shutdown occurs right in the middle of take that you're just nailing, and that's where the longer runtime of the APC BR900 really comes through for you. The APC BR900 will supply the power you need to finish that take uninterrupted - then you can save your creation and power down safely.
The APC BR900 is a high performance desktop battery backup that features maximum protection in a versatile design. The fully featured APC Back-UPS RS can be placed on the floor, or on a shelf. Up to six battery backup outlets with automatic voltage regulation (AVR) enable you to work through even the most frequent brownouts and power sags, keeping 75/90/110 minutes of battery power for when you need it most. For printers and other devices that do not store or process information, up to three additional outlets provide surge protection. Both Ethernet 10/100BaseT and telephone dataline surge protection safeguards against surges entering via network connections. The PowerChute Personal Edition software features easy-to-use safe system shutdown with sophisticated power management.
APC BR900 Specifications:
- Output Power Capacity: 540 Watts/900 VA
- Max Configurable Power: 540 Watts/900 VA
- Nominal Output Voltage: 120V
- Output Connections: (3) NEMA 5-15R (Surge Protection), (4) NEMA 5-15R (Battery Backup)
- Nominal Input Voltage: 120V
- Input Frequency: 47 - 63 Hz
- Input Connections: NEMA 5-15P
- Cord Length: 6 feet Input voltage range for main operations: 88 - 139V
- Input voltage adjustable range for mains operation:78 - 152V
- Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Included Battery Modules: 1
- Replacement battery cartridge: RBC32
- RBC™ Quantity: 1
- Typical Backup Time at Half Load: 17.6 minutes (270 Watts)
- Typical Backup Time at Full Load: 5.3 minutes (540 Watts)
APC BR900 Features:
- Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment.
- Automatically corrects low and high voltage conditions, allowing you to work through brownouts and overvoltages without discharging the battery. This saves battery life, increases uptime, and improves your productivity.
- Provides protection of connected equipment from power surges on the data lines.
- Lifetime data recovery warranty provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
- Safety-agency approved ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
- Protects connected loads from surges, spikes, lightning, and other power disturbances.
- Audible alarms provide notification of changing utility power and UPS conditions.
- Automatically starts up the connected equipment upon the return of utility power.
- Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery replacement without tools allows quick and easy battery replacement.
- LED status indicators
- Cold-start capable - Provides temporary battery power when the utility power is out.
- Hot-swappable batteries ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Resettable circuit breakers enable quick recovery from UPS overload events.
- Transformer-block spaced outlets protect equipment with input transformer blocks without blocking access to other receptacles.
- User-replaceable batteries increase availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
- Adjustable voltage sensitivity provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Adjustable voltage-transfer points maximize useful battery life by widening the input voltage window or tightening the output voltage regulation.
- Serial Connectivity provides management of the UPS via a serial port (excludes BK500-RS).
- USB connectivity provides management of the UPS via USB port (not available on all models).
- Multiple mounting methods allow for standardization on one product for use in different environments.
- Micro-processor controlled battery charging and diagnostic testing ensures maximum battery life.
|
