Click to enlarge Free Shipping

• 
• 
• 
• 

A Mic for Tight Spaces!

The Audio-Technica ATM350 is perfect for a number of miking tasks where space is tight, or low visibility is desired. Supplied with Audio-Technica's versatile UniMount clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.

Audio-Technica ATM350 Cardioid Condenser Clip-on Mic Features:

• Low-profile design for minimum visibility
  
• UniMount clip permits accurate positioning, provides shock resistance and protects element
  
• Unique violin mount permits unobtrusive placement of microphone between the instrument's bridge and tailpiece
  
• Crisp, clear, well-balanced response, even at high SPLs
  
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  
• Interchangeable elements available for hypercardioid and omnidirectional polar patterns
  
• Corrosion-resistant contacts from gold-plated XLRM-type connector
  
• Rugged, all-metal design and construction for years of trouble-free use
  
• Element: fixed-charge back plate permanently polarized condenser
  
• Polar pattern: cardioid
  
• Frequency response: 40-20,000 hz
  
• Low frequency roll-off: 80 hz, 12 db/octave
  
• Open circuit sensitivity: -49 db (3.5 Mv) re 1v at 1 pa
  
• Impedance: 50 ohms
  
• Maximum input sound level: 149 db spl, 1 khz at 1% t.H.D.
  
• Dynamic range (typical): 122 db, 1 khz at max spl
  
• Signal-to-noise ratio: 67 db, 1 khz at 1 pa
  
• Phantom power requirements: 11-52v dc, 3.5 Ma typical
  
• Switch: Flat, roll-off
  
• Weight (microphone): 0.5 oz
  
• Weight (power module): 2.9 oz
  
• Dimensions (microphone): 1.49" long, 0.48" diameter
  
• Dimensions (power module): 3.66" long, 0.74" diameter
  
• Output connector (power module): Integral 3-pin XLRM-type
  
• Cable: 13.1' long (permanently attached to microphone), 0.13" diameter, 2-conductor shielded cable
  
• Accessories furnished: AT8542 power module; AT8418 Unimount microphone instrument mount; AT8468 violin mount;
  
• Soft protective pouch

Specification Detail Microphone Type Condenser Polar Pattern Cardioid Frequency Response 40Hz-20kHz Max SPL 149dB SPL (1kHz at 1% THD) Output Impedance 50 ohms Signal to Noise Ratio 67dB, 1kHz at 1 Pa Color Black Cable Length 13.1 ft. Connector XLR Weight .03 lb. (Mic), .18 lb. (Power Module) Included Accessories AT8542 power module, AT8418 instrument mount, AT8468 violin mount, pouch Manufacturer Part Number ATM350

Recommended Accessories