Click to enlarge Free Shipping

• 
• 

From Our Research Team:

Add Microphone Inputs To Your Aviom Monitor System!

The Aviom AN-16/i-M Input Module lets you add 16 microphone-level signals to AN-Series Distributed Audio Network products to create digital snakes. The AN-16/i-M Input Module can also be used with Aviom Personal Monitor Mixing Systems.





Quality mic/line inputs with 24-bit resolution
The AN-16/i-M Input Module is a 3U-high rack mounted mic and line level input device. It contains sixteen high-quality microphone preamps with 24-bit A-to-D converters. Each channel contains a three-segment level LED meter, a continuously variable Gain knob, phase reverse switch, a 48-volt phantom power switch with LED, and a rumble filter with an 85Hz roll off. In addition, each pair of channels has a Stereo Link switch that allows stereo operation when connected to a Personal Monitor Mixing System.

Tons of rear-panel I/O options!
The rear panel of the AN-16/i-M Input Module contains a host of professional connectivity features. Each channel has a combo jack that can accept either XLR mic or 1/4-inch line level (balanced or unbalanced) inputs. Sixteen passive mic Thru connectors create a built-in microphone splitter. Balanced insert points with separate 1/4-inch Send and Return jacks allow easy interfacing with external processing devices. The sixteen insert Sends can also be used as a set of post-gain direct audio outputs. The AN-16/i-M Input Module uses an internal power supply with a standard IEC power connector.

Digital output to multiple locations
Two parallel A-Net™ outputs allow the AN-16/i-M Input Module to send A-Net data to multiple destinations, allowing for simultaneous patching to a monitor console and a front-of-house console.

Both A-Net outputs feature heavy duty Neutrik EtherCon combo RJ45 connectors. A separate A-Net Expansion jack allows the AN-16/i-M to be used in combination with other AN-Series products and allows the transfer of up to sixty-four channels of audio over a single standard Cat-5 cable. As with all Aviom A-Net compatible products, cable runs of up to 500 feet (150 meters) are possible between devices.


Aviom AN-16/i-M Personal Mixer Features:

• Sixteen high quality mic preamplifiers, with 24-bit A-to-D converters
  
• XLR mic or 1/4-inch TRS balanced inputs on combo jacks
  
• 48-volt phantom power on each channel, with LED
  
• Three-segment level LED indicators
  
• Continuously variable gain knob
  
• Phase switch per channel
  
• Rumble filter switch (85Hz roll off) on each channel
  
• Stereo Channel Link switch per pair of channels
  
• Built-in mic splitter
  
• Balanced insert send and return jacks (1/4-inch TRS)
  
• Dual A-Net outputs allow the A-Net data to be sent to two destinations
  
• A-Net Expansion jack for use with other AN-Series products
  
• Internal power supply; IEC power connector

Specification Detail Manufacturer Part Number AN-16/I-M