| |
Add Analog Inputs to Your RME Audio Card!
Add extra analog inputs to your Hammerfall card! The RME AEB4-I (Analog Expansion Board) adds 4 analog inputs in professional quality to all ADAT capable RME cards (see below). Level adjustment +4 dBu/-10dBV, 107dBA SNR and a servo balanced input circuit deliver perfect sound and sonic clarity.
The AEB4-I is designed for maximum flexibility. Both stereo inputs 1/2 3/4 are automatically copied to channels 5/6 and 7/8. The AEB4-I is easy to install using the supplied bracket, or - as no contact to any slot on the motherboard is needed - at any other location inside the computer. Nuts for all TRS jacks and a drilling template are included.
RME AEB4-I Analog Expansion Board Configuration Options:
- HDSP 9652: Two AEBx-I and two AEBx-O or two TEB can be connected and operated simultaneously, in all possible combinations. One TEB can be used together with either one AEBx-I or AEBx-O.
- DIGI96 SERIES: AEBs use the internal ADAT interface of the DIGI cards. Therefore they do not work with the DIGI96 (which did not support ADAT.) To operate the AEB4-I and AEB8-I the used DIGIs must have the connectors ST6/7 on board (for the Word Clock Module.) These were not present on the very first cards of the DIGI96 series (1998 to beginning of 1999.) One AEBx-I and one AEBx-O can be connected and operated simultaneously, in all possible combinations (or one TEB).
- HAMMERFALL DSP MULTIFACE/DIGIFACE: Multiface and Digiface use the Hammerfall DSP PCI card. This card has no internal inputs or outputs. Therefore no Expansion Boards can be used.
- HAMMERFALL SERIES: An operation with the Hammerfall or Hammerfall Light requires board revision 1.5 or higher, because the internal connectors ADAT1Out, ADAT2Out and ST7 were not implemented in earlier versions. One AEBx-I and two AEBx-O can be connected and operated simultaneously, in all possible combinations (or one TEB and one AEBx-O).
|
