Eurorack 1822fx

[Bops2000]

I just picked up an Eurorack 1822fx, anyone using it ? and before i start building cables, are the subs out (1 and 2) trs plugs ? I plan on running subs out to an maudio 'in'. Then I question where do my maudio outs, and the onboard A97 card outs (for midi), go to? I assume I have to dedicate 2 stereo inputs on the board to send to mains/mons. I am curious if this 'loop' is considered stable.

[Sonic Valley]

I took the UB2442fx Pro out to a gig at a music conference this week end as part of a broadcast special. The pre amps sucked big time. Super weak. The routing was fine tho and yes I belive the busses are balanced TRS. You can route your m audio returns back into a stereo strip for refernce and as long as they aren't bussed to the same subs you use to record to the m audio you won't be in the loop. That way you can monitor tracks you laid and record fresh ones without interference.

[Bops2000]

ACK ! the preamps sucked ?
do you mean as in gain (hot) ? what type of mikes?
ps thanks for the reply, I always get balled up runnin' computer to analog and back.

[Sonic Valley]

Ya...super weak...I had my 01V on site thankfully to handle to the live mixes feeding the 2442...in the end all the 2442 was used for was a few large diaphram mic and CD players.

Did you get a chance to test out the mixer before you bought it?

[Bops2000]

Well I used a smaller one before, and it was clean at least. It was a little four channel thing. What usually happens is I use this stuff and as I progress, I give it to my 15 year old son
But I figured for 219 bucks...
I also have the other mixer in home studio, sheesh as well as controls in windows.
I am using this for home stuff with a couple of 'blues' mikes (look like 58's -pattern looks good), sm57s' and an at3035 (audio technica) I love that mic.
I finally got a free site on mp3 and will send out snippets of 'this is this using this' type of discriptions for the recordings.
I am trying to attack this seriously, but it's still a hobby.
I used to run the little mixer input in the
red then sent to DAW at -1 more or less, again this will be a fun, (as well as frustrating) challenge for me.
Kepp ya posted no pun