studio 882 interface

[davem]

recently bought an 882 studio and the old quadra that it's been running on. i have experience with every digidesign interface but this one.the software won't open because of what appears to be a need for more drive space. there is one cable, with a scsi adaptor on it connected to the face of the nubus card that i am assuming wants to be hooked up to an external scsi drive. am i right about that? the external scsi jack on the card hooks up to the interface right? i could use any help at all with this.

thanks,

dave

[DAS]

Sounds like you have it right. There are two cables that connect to the Nubus card. One is obviously an old style Centronics SCSI cable. That MUST be connected to a working SCSI drive in order for the software to launch. Then, there is a second cable that has a SCSI 2 connector on each end. This is the audio cable that runs between the 882 Studio and the Nubus card. Once you have all this in place, with a working computer and the correct version of software you should be all set.