Apogee AD-16x with M-audio 2626

[Barneysb]

I would like to know if is possible to use apogee ad-16x with m-audio 2626 since the apogee has 2 adat outs and the 2626 has 2 adat ins? and If i could sinc the apogee ad-16 as the master clock with the 2626 at 48k using these 2 adats?

Thank you

[michaelhoddy]

Yes you can, although with the ADAT I/O, you'll be limited to 44.1 or 48 kHz sampling rates unless you use SMUX and halve the number of available channels.

You should run your clock sync separately between the Apogee and M Audio via the BNC wordclock connections on both pieces. ADAT lightpipe is a terrible medium for transmitting clock.