Free Shipping with no minimum purchase. Learn more »

Cart (800) 222-4700 Español (800) 222-4701


The Roger Nichols Gear Collection

Expert Center Sweetcare

«Back to Tech Tip Menu

Search:

Tech Tip of the Day Archives
1997 | 1998 | 1999 | 2000 | 2001 | 2002 | 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012

Differences between UHF and VHF wireless systems.
06/14/2001

"My band travels around the region a lot and several members use wireless equipment (guitar, mic, or both) and it seems like almost everywhere we go at least one of the systems doesn't work due to interference. So we've decided to upgrade to frequency agile systems, however, I hear conflicting reports on whether I should go with UHF or VHF units. Please advise."

The ability to vary the operating frequency of your wireless units should dramatically increase the overall reliability of them as you travel. Whether you use UHF or VHF is of less importance, unless you use many wireless systems on stage, and by 'many' I mean more than 10 or 15.

Many people mistakenly think that UHF is an inherently better technology. It is not. The difference between UHF and VHF transmissions is only the frequency range or 'band' they are in. The technology, or principle of operation is the same. UHF frequencies are higher so the componentry used in those devices must adhere to very tight tolerances, and therefore tends to be more expensive, which helps perpetuate the myth that the technology is better.

The main advantage of UHF operation is that there is less chance of interference. One of the more common problems with wireless operation is interference between wireless systems. Since there are considerably fewer UHF wireless systems in use at present, the chances of this type of interference are reduced. However, this problem can generally be avoided in VHF systems by properly selecting operating frequencies.

If you're show utilizes many systems it can be easier to find good frequencies for all of them to operate if they are in the UHF band. And though there is no difference in technology, interference due to spurious outputs from other radio frequency equipment is somewhat less of a problem at UHF frequencies because there are fewer transmitters operating at frequencies likely to cause problems. Interference due to electrical equipment, digital devices, computers and other electronic equipment is also generally lower at UHF frequencies. This is because noise from these sources becomes less intense as the frequency increases. Interference of all types does not travel over as great a distance as at VHF frequencies. So there are some 'advantages,' but they come at a cost, and depending upon your situation may not be significant.

VHF systems cost less and have a wider variety of choices and options. They also do work better than UHF systems in 'some' circumstances. For example, because VHF frequencies are lower they can sometimes work better when the transmitter and receiving antenna are not in sight of each other. Most UHF systems are in fact considered 'line of sight' systems, but they can have more range than comparable VHF systems.

Your Sweetwater Sales Engineer will be happy to weigh these and other pros and cons against your budget with you.





Other Techtips from June 2001:
June 29 - A great way to work around latency in your host based recording system.
June 28 - MO technology versus Minidisc.
June 27 - What are blind transfers and how (and when) should I turn them off?
June 26 - Producer secret for keeping a singer on pitch.
June 25 - Care of touch screens.
June 22 - Those late night mixes: are they worth the trouble?
June 21 - Vibrating studio monitors and hollow speaker stands.
June 20 - Converting 24/48 kHz audio down to 16/44.1 kHz audio.
June 19 - Pro Tools & ADAT Bridge interfacing issues.
June 18 - Differences between Format and Initialize.
June 15 - Acoustic bass feedback problems.
June 14 - Differences between UHF and VHF wireless systems.
June 13 - Adding different low frequency cabinets to a PA.
June 12 - Matching amps to speakers.
June 11 - So what really happens with that extra data from oversampling?
June 08 - How to transport valuable guitar equipment.
June 07 - Windows XP implementation in music computer systems.
June 06 - G4 upgrades in the 9600.
June 05 - One solution for fret buzz: how to adjust your truss rod.
June 04 - More on Roland VS data compression.
June 01 - Advantages of front ported versus rear ported speakers.


1997 | 1998 | 1999 | 2000 | 2001 | 2002 | 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012
     
Home | Gear Reviews | Videos | Buying Guides | Glossary | Tech Tips | Show Reports | Publications | Featured Articles

Our Customers Say...

One thing I really admire about Sweetwater is that every customer is treated well, whether they're purchasing something for $10 or $10,000. You don't find that at other places. We consider Sweetwater a partner.
Joel Kass, Chicago, IL

Sweetwater Sound Inc.
5501 U.S. Hwy 30 W
Fort Wayne, IN 46818
Get Directions »

Toll Free (800) 222–4700
Español (800) 222–4701
Local (260) 432–8176
Fax (260) 432–1758
E-mail us

Phone & Retail Store Hours:
9–9 Monday–Thursday
9–8 Friday
9–7 Saturday
(All hours listed are
Eastern Standard Time.)

© 2012 Sweetwater Sound Inc. All rights reserved. Please read our Terms of Use and Privacy Policy. Links | Press Releases